Peter Wallers Fleas
Moderators: BeligerAnt, petec, administrator
Re: Peter Wallers Fleas
my ant spinner also that model of brushless. are you gonna get a 3D printed mount for the disc? i got Alex to print one for me and he managed to get it very well balanced. also, will this be another under cutter?
Daniel Jackson.
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Peter Wallers Fleas
Rory I have been having second thoughts about the motor.
I chose it originally as it was the thinest motor I had but I am concerned about how the legs will stand up to the impact and if they might bend in far enough to engage the spinner.
As it turns out a taller motor would bring the blade down lower so I might be changing to a longer but smaller diameter one.
Dan it is likely to be an udercutter but I prefer to make my blade hubs out of fibreglass or aluminium as they are stronger and can take a grub screw better.
One strange thing I have noticed is that when inverted it still travels in the same direction which probably means left and right are reversed.
I chose it originally as it was the thinest motor I had but I am concerned about how the legs will stand up to the impact and if they might bend in far enough to engage the spinner.
As it turns out a taller motor would bring the blade down lower so I might be changing to a longer but smaller diameter one.
Dan it is likely to be an udercutter but I prefer to make my blade hubs out of fibreglass or aluminium as they are stronger and can take a grub screw better.
One strange thing I have noticed is that when inverted it still travels in the same direction which probably means left and right are reversed.
Re: Peter Wallers Fleas
Those motors are really good if you can get them well supported, but that's tricky in an undercutter.. What sort of weight do you have spare for the blade?
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Peter Wallers Fleas
That's the motor I had my "spinner incident" with. I also broke one with a big hit because it was badly supported and the impact snapped the wires on the inside. Its not one that lends itself to easy maintenance.
Die Gracefully Robotics
Winner - AWS 39
Winner - AWS 39
Re: Peter Wallers Fleas
Yeah, I had to do a lot of babying to get it to run in Bad Idea without destroying itself..
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Peter Wallers Fleas
my one is bolted into a very solid 4mm HDPE verticle mounting piece which i think absorbs most of the force on hits. it also helps to have the blade exactly balanced i think. i've never had a problem with it but then again i have yet to hit anything properly.
Daniel Jackson.
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
Re: Peter Wallers Fleas
I'm pretty sure yours is a smaller ~50w version Dan; this one is ~125w and quite a bit larger.
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Peter Wallers Fleas
Ah right. I didn't know there were different ampages of the same motor... Another silly noob thing...
Daniel Jackson.
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Peter Wallers Fleas
I don't think it is the same motor they just look alike the one I have is 30mm diameter which is quite large.
Either way it is hardly a silly noob thing you seem to be gaining experience and knowledge at a good rate to me.
Anyway I have abandoned that motor for a much smaller one as below although this one I have broken so am awiting another from HobbyKing.
Also I have been having problems with putting some protection down the outside of the legs, within the 3 inch cube, to avoid the opposition pushing my legs into the spinner.
Here it is sofar still needs a disc and brushless controller but it is at least moving around and weighing in at 76gms.
http://youtu.be/gUDSX4R41XY
Either way it is hardly a silly noob thing you seem to be gaining experience and knowledge at a good rate to me.
Anyway I have abandoned that motor for a much smaller one as below although this one I have broken so am awiting another from HobbyKing.
Also I have been having problems with putting some protection down the outside of the legs, within the 3 inch cube, to avoid the opposition pushing my legs into the spinner.
Here it is sofar still needs a disc and brushless controller but it is at least moving around and weighing in at 76gms.
http://youtu.be/gUDSX4R41XY
Last edited by peterwaller on Fri Jul 21, 2017 7:29 pm, edited 1 time in total.
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Peter Wallers Fleas
Finally come up with a Ronseal type name as Dave would call it.
Shuffleaction
Shuffleaction