Hello,
I came across these 3D printed scalextric wheels on shapeways: http://www.shapeways.com/product/BT9F46 ... d=40780127
Does anyone know which scalextric cars I should be stealing tyres from for these wheels?
So far, I haven't found any that I have lying around that fit them, so if someone already knows which I should use, it would be very helpful.
Thanks in advance for useful info.
3D printed scalextric wheels for antweights.
Moderators: BeligerAnt, petec, administrator
-
- Posts: 50
- Joined: Fri Jan 04, 2013 3:21 am
- Location: Capel le Ferne
Re: 3D printed scalextric wheels for antweights.
Hi, I believe I made those a long time ago.
I think they are to fit 20-20.5mm Ninco Slick tyres. Probably the 11.5mm wide ones.
I was using those a good few years ago now though, so I may be wrong!
Dave Weston had a few sets, he may know.
Josh
I think they are to fit 20-20.5mm Ninco Slick tyres. Probably the 11.5mm wide ones.
I was using those a good few years ago now though, so I may be wrong!
Dave Weston had a few sets, he may know.
Josh
RPD International
www.RPDintl.com
www.RPDintl.com
- UserFriendly
- Posts: 119
- Joined: Wed Feb 18, 2015 3:52 pm
Re: 3D printed scalextric wheels for antweights.
@dcr raptor
I've made my own silicone tyres:
https://youtu.be/LzBm1Zx5Yh0
If you have a 3D printer, you can print off my wheel design and wheel mould design, and print and cast your own quite cheaply. (linked in video)
Also, I've made some other smaller wheels and tires that are closer to scalextric diameters:
@josh
Looking forward to seeing RAPID on Sunday! Be good to see you at an AWS sometime!
I've made my own silicone tyres:
https://youtu.be/LzBm1Zx5Yh0
If you have a 3D printer, you can print off my wheel design and wheel mould design, and print and cast your own quite cheaply. (linked in video)
Also, I've made some other smaller wheels and tires that are closer to scalextric diameters:
@josh
Looking forward to seeing RAPID on Sunday! Be good to see you at an AWS sometime!
Andy B - Team UserFriendly
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.