Soapbox Racers

Wanna talk about something other than robots? Really?? Can't understand it myself, but if you really want to, do it here....normal rules apply though!!

Moderators: BeligerAnt, petec, administrator

User avatar
peterwaller
Posts: 3190
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Soapbox Racers

Post by peterwaller »

I put 4 tack welds on each rear wheel and that seems to work OK so just need to adjust the brakes and we can test it out agai.
The Aylesbury event is 21st June.
I have orderd some 1mm polycarb sheet for body panels but they are more decrotive than structual and I am trying to create a rollover bar af some kind in a material I can fabricate by hand.
I agree wuth Dave ( did I just say that ) it would be good to see you back with the robots.

User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Re: Soapbox Racers

Post by earthwormjim »

Aww. Thanks Guys.

I am riveting 1.5 mm Aluminium sheet for paneling, as It is easy to bend round corners.
As I now don't have any time restraints, I think I might take it easy and try some push rod suspension!
I bought some tubing for a roll over bar, but have yet to find a good enough method of bending it, filling it with sand and whacking it against a tree only works to a point! :)
Image

User avatar
limpet
Posts: 376
Joined: Fri Jan 13, 2012 5:18 pm

Re: Soapbox Racers

Post by limpet »

Its something I`ve wanted to build for a long while, Hinckley now has an annual soap box race down the main street.
This year it is July 5th.
–-----------------------------

For AntFreeze
https://www.facebook.com/AntFreeze/

For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies

User avatar
peterwaller
Posts: 3190
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Soapbox Racers

Post by peterwaller »

Just about getting the soapbox finished, apart from a few decorative issues, that’s been about 6 weeks without anything robot related and I am starting to get withdrawal symptoms.
Just in time to get ready for the Wales event I should have a new car by then.
Spent a couple of months going round gararges with a trusty tape measure to make sure there is room for the arena.

Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Re: Soapbox Racers

Post by Occashokka »

peterwaller wrote:
Spent a couple of months going round gararges with a trusty tape measure to make sure there is room for the arena.
Now that's what I call dedication lol
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P

Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: Soapbox Racers

Post by Rapidrory »

Hehe, boot space was a big concern when getting my new car over Christmas; had to be able to cart my army of robots around without being too much of a squeeze!
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

User avatar
peterwaller
Posts: 3190
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Soapbox Racers

Post by peterwaller »

When the salesman got to the bit where you can remove the backseats I was reaching for my chequebook.
Image

EpicentrE
Posts: 829
Joined: Mon Jun 09, 2003 12:00 am
Location: Coventry
Contact:

Re: Soapbox Racers

Post by EpicentrE »

New Peterena coming? :D
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk

User avatar
peterwaller
Posts: 3190
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Soapbox Racers

Post by peterwaller »

Here is the just about completed Soapbox Racer just needs some decals.
Image

User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Re: Soapbox Racers

Post by earthwormjim »

Wow, Peter.
That looks really nice.
Have you had a go in it?
What material is it coated with? Looks interesting?
Image

Post Reply