New Robots
Moderators: BeligerAnt, petec, administrator
-
- Posts: 110
- Joined: Sat Aug 14, 2010 5:44 am
- Location: Italy
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
I should probably make a build diary but I've started this post now... done a bit more, machined a base milled from 4mm polycarbonate.
RPD International
www.RPDintl.com
www.RPDintl.com
I don't think faster but it should be double the torque so i think thats 4.8kg/cm and the servo arms are 1cm long although the linkage ont he arm will be quite far up to try have some speed in it, it should still be quite powerful
RPD International
www.RPDintl.com
www.RPDintl.com
Hey guys
I just finished the rebuild of my Drive-all-day robot some of you may have seen at live events (Aylsebury was its first one), But since it wanted to be used for the upcoming AWS, I thought it best to rebuild it.
I give you Bulletproof:
its 5g overweight ATM, but that can be solved with a smaller battery.
I just finished the rebuild of my Drive-all-day robot some of you may have seen at live events (Aylsebury was its first one), But since it wanted to be used for the upcoming AWS, I thought it best to rebuild it.
I give you Bulletproof:
its 5g overweight ATM, but that can be solved with a smaller battery.