Polycarbonate
Moderators: BeligerAnt, petec, administrator
-
- Posts: 36
- Joined: Sun Oct 14, 2007 2:37 pm
- Location: Great Missenden, Bucks
-
- Posts: 339
- Joined: Sat Oct 20, 2007 7:20 pm
- Location: worthing/ west Sussex
My advice would be to put the polycarb in a tub of very hot water for about a minute and then fish it out and bend it to the shape required and run it under cold water it works great.
For a very cool efect add a few drops of food colouring to the water and let the polycarb sit for about 15 minutes and it really soaks up the colour tinting it whatever colour you want. Sorry this ended up sounding like a cooking program.
For a very cool efect add a few drops of food colouring to the water and let the polycarb sit for about 15 minutes and it really soaks up the colour tinting it whatever colour you want. Sorry this ended up sounding like a cooking program.
Fight or flight ... ?
...suicide
...suicide
1mm clear plasticard
I've just bought 1mm clear plasticard this as the 2mm polycarb I've got is too heavy for what I need.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0059677339
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0059677339
-
- Posts: 339
- Joined: Sat Oct 20, 2007 7:20 pm
- Location: worthing/ west Sussex
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
- Simon Windisch
- Posts: 1806
- Joined: Tue Apr 15, 2003 12:00 am
- Location: Reading
- Contact:
It seemed the most appropriate place to put it and on a training forum that I own it's in our rules as it keep info all together without there being too many post about the same subject. Plus, not everyone will have seen the earlier posts if they, like me, have just joined.muchalucha wrote:try not to post in threads that are that old , its called thread bumping , everyone (including me) has done it , but it is quite annoying for the mods. in future its better to start a new thread
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact: