starting

leo-rcc · Post by **leo-rcc** » Mon Sep 04, 2006 7:19 am

Hardox comes in various grades, but hardox 400 has the minimum thickness of 3.2mm. Hardox 500 only starts at 6mm.

josh · Post by **josh** » Mon Sep 04, 2006 9:31 am

i didnt kno there was 2mm hardox if i did i would get that but i got this free from a sponsor so thought i may as well use it

leo-rcc · Post by **leo-rcc** » Tue Dec 05, 2006 1:53 pm

http://robotwars.demon.nl/ipswich/IMG_3140.JPG

Hannibalito in costume.

leo-rcc · Post by **leo-rcc** » Wed Feb 07, 2007 9:12 am

Some of you have already seen it in Reading as it was under construction, and at AWS21 only the discs were there, but now I present to you the finished Raptor-weight:

Just over 4,5kg with everything attached. Many thanks to Dennis and Tim who helped me out with this project. I'm very pleased with the outcome.

Some specs:

3 Graupner SPEED 700 TURBO C 9,6 V (18A nominal 120A stall @ 9,6V)
3 RC-Smart 6-12V speed controllers 100A fwd/60A rev
9,6V IB4200 Nimh pack (might be swapped for a Lithium pack in future)
Spekrum DX6 and BR6000 RX/TX
High Density Polyethylene and Titanium armour
Modified Serpent RC car wheels

Now on to the Feather, light, middle and heavy version.

Cavecrusher · Post by **Cavecrusher** » Sat Feb 10, 2007 7:17 pm

oh, god, what have i started !!

leo-rcc · Post by **leo-rcc** » Sat Feb 10, 2007 7:23 pm

You start, I finish.

maddox · Post by **maddox** » Fri Feb 16, 2007 6:26 pm

Cavecrusher, start cutting the disk for the heavy

Cavecrusher · Post by **Cavecrusher** » Sun Feb 18, 2007 10:16 am

work in progress

maddox · Post by **maddox** » Sun Feb 18, 2007 11:22 pm

http://robotwars.demon.nl/maddox/rebuild/

More work in progress.

Hannibalito, after more than 50 fights deserved a little makeover.
And of course, a brother has been born.

I think the arena's need a new roof ...

leo-rcc · Post by **leo-rcc** » Mon Mar 19, 2007 11:05 am

Hannibalito 1.3

2 x Graupner speed 900 drive @ 12V
RC-Smart speed controllers 12V 100A forward/60A reverse
Spektrum DX6 and BR6000 TX/RX
Full pressure Flipper 32 mm bore, 70 mm stroke custom made by Maddox
Voltage booster on board to power the valve @ 36V
Robbe RC switch to activate weapon
Armour 10 mm on all sides and top.