fleas

[Remote-Controlled Dave]

In fact, he's signed up and you haven't.

[haz]

problem gustav?

[teamocean]

Had a slight issue with Inertia's XS1 and 2, the setup has broken 2 motors now so I have done a few mods to the last motor I have in the hope it will stay together for long enough to take part in the AWS.

I have taken the drive out of XS2 and put it into a litte 2WD pusher- its very light and pretty quick- will weigh it it in a bit but I reckon it is only around 50g.

[Remote-Controlled Dave]

TAPE!!

[Pugster2002]

i have another flea now its called flea rage
name:flea rage
power:motor
armour:plastic
weaapon:spinning axe
weight:32grams

[earthwormjim]

I have a new flea.
It is a 4 bar lifter.
It is called "Cheese it!"

50:1 hp motors.2x turnigy 160 mah 1s cells,mks ds450 3.1kg/cm servo,baby orangutan controller and 4ch orange hk spektrum-alike rx.
.5mm titanium chassis and armour,Raouls old 3d printed wheels with printer roller tyres.
It has come in at 73.2g. and is 75mm wide,70mm long,and 25mm tall.

chassis.


inside.


and next to a can for size comparison.


And here is a quick video of it pootling around...
http://www.youtube.com/watch?v=_enlx64Q ... ature=plcp
Cheers Jim.

[ajw]

That looks fantastic! I'd seen your 4 bar lifter video but hadn't realised it was for a flea! Amazing what you've crammed into such a small weight limit and great paint job too.

[joey_picus]

I second that, you've done a brilliant job there as always I'm amazed at how compact it all is, hehe!

[earthwormjim]

Cheers guys.
It started out as an idea for an ant,but after I weighed all the components,I thought I'd try and squeeze it into a flea!
Hopefully I wont break it before I get it to Brighton!

[Remote-Controlled Dave]

Mmm...cream soda with a hint of rasberry...oh, and the tiny cheese robot isn't bad either!