the fleaweight diet?

All things small and scratchy.

Moderators: BeligerAnt, petec, administrator

User avatar
Rhys
Posts: 738
Joined: Tue Oct 29, 2002 12:00 am
Location: Caerphilly, South Wales

Post by Rhys »

http://www.hobbyking.com/hobbyking/stor ... duct=10915


I've ordered some for a little project I'm working on. I'll let you if if they're any good. I'm sure on these forums have already tried them though.

User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Post by earthwormjim »

Wow,thats cheap! I just made up a 130 mah pack that cost ALOT more than that. :roll:
Image

razerdave
Posts: 1544
Joined: Mon Jan 02, 2006 9:40 pm
Location: Carterton, Oxfordshire
Contact:

Re: the fleaweight diet?

Post by razerdave »

Hey guys.

I've been rebuilding Little Devil properly and I've managed to install the servo and compact it all, and it comes to 75g...without the flipper :P I have to lose about 10g to get the flipper on (made from CF, muchos Gracias to Josh for that). I think I can do it, may involve a lot of holes, and I'm hoping 1mm circuit board weighs less than 2mm HDPE does :P.

On the plus side, I finally got LD to self right for the first time since I got it :P

josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Re: the fleaweight diet?

Post by josh »

I think the circuit board will be roughly half the weight of the hdpe, I imagine they are about the same density
RPD International
www.RPDintl.com

haz
Posts: 1840
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: the fleaweight diet?

Post by haz »

i got some 1mm hdpe you could have dave :)

razerdave
Posts: 1544
Joined: Mon Jan 02, 2006 9:40 pm
Location: Carterton, Oxfordshire
Contact:

Re: the fleaweight diet?

Post by razerdave »

I've got plenty, but thanks for the offer Haz. I needed something thinner than the 2mm but also a lot stiffer than HDPE, hence the circuit board.

haz
Posts: 1840
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: the fleaweight diet?

Post by haz »

okay sure (try fitting 10mm armour into a flea its faaar to hard :evil: )

User avatar
Rhys
Posts: 738
Joined: Tue Oct 29, 2002 12:00 am
Location: Caerphilly, South Wales

Re: the fleaweight diet?

Post by Rhys »

These could be just the thing for fleas, only 5g each!

http://www.himodel.com/electric/HiModel ... _Pack.html
Image

haz
Posts: 1840
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: the fleaweight diet?

Post by haz »

:o

haz
Posts: 1840
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: the fleaweight diet?

Post by haz »

hey, need some more lightening advice
my spinner (not the drum one) is a bit too heavy, its 72g withought armour, and i need armour :-?
parts im using are:
2 50:1 motors with tiny wheels (wheels are 1g each)
2 small servo boards, with resistors fitted
12g outrunner with a 10g disc
5g dsm2 rx with esc's soldered directly to it(badly :roll: )
180mah 7.4v lipo
1mm polycarbonate
1 hobbywing 10a esc


i think the obvious solution is to get a smaller batter, but is their anything else?

Post Reply