![Sad :-(](./images/smilies/icon_e_sad.gif)
Another New Nanoweight...
Moderators: BeligerAnt, petec, administrator
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Another New Nanoweight...
8g is lighter than my sponge one was! (Which is now broken
)
![Sad :-(](./images/smilies/icon_e_sad.gif)
Die Gracefully Robotics
Winner - AWS 39
Winner - AWS 39
Re: Another New Nanoweight...
Last robot of the weekend:
![Image](http://i.imgur.com/1NO3VG6.jpg?1)
I wanted to try out those little drive units properly (the only other bot I've built with them was the walker) so I put them together in a little flipper.. and jeeze these things are fast! Got it dialed down to 20% travel adjust and it's only just controllable at full speed... good fun though
Just need to fit a power switch and charging socket and it'll be done.
![Image](http://i.imgur.com/1NO3VG6.jpg?1)
I wanted to try out those little drive units properly (the only other bot I've built with them was the walker) so I put them together in a little flipper.. and jeeze these things are fast! Got it dialed down to 20% travel adjust and it's only just controllable at full speed... good fun though
![Smile :)](./images/smilies/icon_e_smile.gif)
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Another New Nanoweight...
It's been almost 8 months since I last built a Nanoweight, and with my original team now getting a little worse for wear, I felt I should get on and build some more.
This one has been half built since January, but I finally took it apart and put it in a new chassis. Meet 'Lousy Concept':
![Image](http://i.imgur.com/mTBtMxG.jpg?2)
Yes, it is a mini Bad Idea, and it works remarkably well; Drives nicely and smashes up things without throwing itself around.
Should be fun if I can get it in weight; about 25.5g atm and it still needs a charging port.
This one has been half built since January, but I finally took it apart and put it in a new chassis. Meet 'Lousy Concept':
![Image](http://i.imgur.com/mTBtMxG.jpg?2)
Yes, it is a mini Bad Idea, and it works remarkably well; Drives nicely and smashes up things without throwing itself around.
Should be fun if I can get it in weight; about 25.5g atm and it still needs a charging port.
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Another New Nanoweight...
As procrastination from doing revision, i put together a rather boring little Nano with full sized ant wheels. Was meant to have a servo underneath to lift the wedge Polar Vortex style, but since the drive alone weighs 12g i rather ran out of weight. This will likely end up in lemmings at some point as it's not a bad pusher
![Image](http://i.imgur.com/JJUkzYX.jpg?1)
![Image](http://i.imgur.com/JJUkzYX.jpg?1)
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc