A discussion forum for proposed changes to the AWS rules
Moderators: BeligerAnt, petec, administrator
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
3c) At least half of the edge of the arena must be unwalled, to allow robots to drop directly into the ditch that surrounds the arena (a recommended height for arena walls is 50mm).
Craig_Anto3 wrote:Anyone like to try a 50% enclosed arena with low walls on the drop off which you can be flipped over, maybe only 25mm tall? I think it'll give us some much more interesting fights.
BeligerAnt wrote:No, I disagree. Even 25mm high walls would make for a lot of long and boring fights between pushers which would be almost impossible to satisfactorily judge. The 50% drop-off has been in the rules since the dawn of time and I think it is one of the "fundamental rules" of antweights. There is nothing to say that the 50% has to consist of two complete sides. However, a gap of less than about 150-200mm is very difficult to push an opponent through. Push-bots need to be able to win fights just like flippers and spinners; this is very important for encouraging beginners.
- Posts: 555
- Joined: Wed Jan 23, 2002 12:00 am
- Location: Burgess Hill, West Sussex
Having just re-read these, I'm confused. A 50% enclosure is what the rules allow anyway....my arena is 50% drop off. Have I missed something?
- Posts: 3198
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
I think Craig was suggesting 50% fully walled and the other 50% dropoff sides to have low walls.
It would certainly help me to stop driving out.