Page 1 of 1
Autonomous Robot CAD drawings
Posted: Sat Nov 05, 2005 2:40 pm
by Adam Hargreaves
Just the one to start with: this done with Sketchup. Comments please.
and yes, the body shell isn't lined up very well, lol
Posted: Sat Nov 05, 2005 5:33 pm
by Raizor
The only thing i would suggest so a very good way of attaching the wheels (they appear to be lite flights) to the servo's. Idealy a completely custom hub would be best but failing that a good solid connection (i.e. more than just a blob of gloue) between the servo horn and the hub of the lite flight.
Posted: Sat Nov 05, 2005 7:34 pm
by Adam Hargreaves
my DT teacher says to use some little screws he claims to have. I need to cut the wheels in half, because they're too wide, so that will give a nice surface to have glue as well.
Team Anticide
Posted: Thu Feb 16, 2006 6:48 pm
by Andrew_Hibberd
Lab got cancelled so no operating robot, however this is a CAD of the final design.
100mm wide, 92mm wide, 90mm high(to top of switch)
weight is going to be about 400g
http://i23.photobucket.com/albums/b352/ ... SUMoV1.jpg
120Kb
The green see through part is 1mm Alumium.