Ellis's (Team BANANAPHONE/A12) build log!
Moderators: BeligerAnt, petec, administrator
Ellis's (Team BANANAPHONE/A12) build log!
hey!
Thought I'd finally get around to making a build diary after AWS59 - great event, did awful but very happy with myself for making a robot that did something vaguely like working, although mostly thanks a lot to Dave Weston for re-doing my bad soldering and lending me a nano-two, so here I am. After AWS59 I've been redesigning Solderburn to fit the components inside better and be more drive-able, and y'know, function on the day of the event.
Soldeburn V2's new chassis vs the old Solderburn - the parts will fit a lot better! (SLS Nylon 12)
I'm hoping to enter & compete in AWS60, but with mocks before it might be a tight one
Thought I'd finally get around to making a build diary after AWS59 - great event, did awful but very happy with myself for making a robot that did something vaguely like working, although mostly thanks a lot to Dave Weston for re-doing my bad soldering and lending me a nano-two, so here I am. After AWS59 I've been redesigning Solderburn to fit the components inside better and be more drive-able, and y'know, function on the day of the event.
Soldeburn V2's new chassis vs the old Solderburn - the parts will fit a lot better! (SLS Nylon 12)
I'm hoping to enter & compete in AWS60, but with mocks before it might be a tight one
Last edited by retropunk on Wed Oct 30, 2019 6:44 pm, edited 1 time in total.
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)
-
- Posts: 71
- Joined: Sat Apr 14, 2018 8:10 am
- Location: Surrey
Re: Ellis's (Team BANANAPHONE/A12) build log!
Ah mocks, the bane of my teenage years. Good luck with them!
Am I right in thinking v2's chassis is bigger? Is it much heavier? Not sure I'd want MicroNewton fighting it anytime soon! Maybe one of my newer flippers which have much thicker fronts...
Also, kudos to you for making a spinner as your first bot. I'm four in and yet to start even CADing a spinner.
Am I right in thinking v2's chassis is bigger? Is it much heavier? Not sure I'd want MicroNewton fighting it anytime soon! Maybe one of my newer flippers which have much thicker fronts...
Also, kudos to you for making a spinner as your first bot. I'm four in and yet to start even CADing a spinner.
Michael - Team MG Robotics
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Re: Ellis's (Team BANANAPHONE/A12) build log!
Thanks!
Yes, v2’s chassis is a lot bigger ( had a problem with the chassis having to bulge because the parts didn’t fit ) but not much heavier, pros of using a pretty light filament.
It’s not technically my first bot but it’s my first solo bot, as in one that wasn’t done with my uncle who has lots of engineering experience. Solderburn started out as being based on Neon (FW) and Rev 2 from Bugglebots, but since it’s bigger now and fitting all of the parts, the design changed shape a lot!
Yes, v2’s chassis is a lot bigger ( had a problem with the chassis having to bulge because the parts didn’t fit ) but not much heavier, pros of using a pretty light filament.
It’s not technically my first bot but it’s my first solo bot, as in one that wasn’t done with my uncle who has lots of engineering experience. Solderburn started out as being based on Neon (FW) and Rev 2 from Bugglebots, but since it’s bigger now and fitting all of the parts, the design changed shape a lot!
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)
-
- Posts: 71
- Joined: Sat Apr 14, 2018 8:10 am
- Location: Surrey
Re: Ellis's (Team BANANAPHONE/A12) build log!
What weapon motor/ESC combination are you using out of interest?
Michael - Team MG Robotics
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Re: Ellis's (Team BANANAPHONE/A12) build log!
DYS BE1806 and an Afro 12A esc from hobbyking!
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)
-
- Posts: 71
- Joined: Sat Apr 14, 2018 8:10 am
- Location: Surrey
Re: Ellis's (Team BANANAPHONE/A12) build log!
So glad I asked, the ESC I'd been looking at was 30A and weighed 24g...! Cheers!
Michael - Team MG Robotics
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Re: Ellis's (Team BANANAPHONE/A12) build log!
Drilled both new bodies yesterday evening because some of the drill holes hadn’t printed properly and screwed them both on (black self-tapping M2s from Amazon), and mounted the drive motors.
While reusing the mounts from the original Solderburn, found one of the motors that had been trashed in the whiteboard rumbles at AWS59 and I now see why it wasn’t working.
While reusing the mounts from the original Solderburn, found one of the motors that had been trashed in the whiteboard rumbles at AWS59 and I now see why it wasn’t working.
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)
Re: Ellis's (Team BANANAPHONE/A12) build log!
Updated the image links so they work now!
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)
Re: Ellis's (Team BANANAPHONE/A12) build log!
That motor doesn't look healthy!
Looking forward to seeing Solderburn V2 in action!
Looking forward to seeing Solderburn V2 in action!
Thomas - Approximation Robotics AKA "the one that does the mechanums"
Ants:
PLA-ST Is a Perfectly Legitimate Choice of Material
Percussive Maintenance 4: A New Spinner
Stack Overflow
Beetles:
Déjà Vu/Two
Ants:
PLA-ST Is a Perfectly Legitimate Choice of Material
Percussive Maintenance 4: A New Spinner
Stack Overflow
Beetles:
Déjà Vu/Two
Re: Ellis's (Team BANANAPHONE/A12) build log!
Yeah, luckily I have spares now!
team A12 / BANANAPHONE
Solderburn v2 (1-5)
Solderburn v2 (1-5)