New Robots

All things antweight

Moderators: BeligerAnt, petec, administrator

Locked
User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Post by peterwaller »

I have just completed SuperMilitANT. This means I now have a complete set as Fleabite is also a militANT clone in the flea weight divison. SupermilitANT has speed hacked S135L's for drive and about a 35gm 110 mm diameter spinner using either two stanley knife blades or a homemade titanium blade depending on the opposition armour. ANTicyclone has now reverted to it horizontal disc but with titanium front forks to get under the opposition and guide them into the blades.
User avatar
Simon Windisch
Posts: 1806
Joined: Tue Apr 15, 2003 12:00 am
Location: Reading
Contact:

Post by Simon Windisch »

Now that's what I call scary. Sounds like you won't be the only one ordering more R114Fs, or can one glue them back together again :wink:

Simon
hades
Posts: 7
Joined: Tue Apr 02, 2002 12:00 am
Location: Leicester
Contact:

Post by hades »

New hades is now done. 149g, 1mm polly and two s3003 for drive speed hacked. V-Fast and it can push a brick up a 1:4 ramp so alot of power too!
Raizor
Posts: 101
Joined: Fri Apr 12, 2002 12:00 am
Location: Ireland
Contact:

Post by Raizor »

Hi

Pete get super combatant going again and you will have two complete sets. I have combat flea you have combatant and super combatant.

Regards
Ian Mc Donald
The Irish Guy
Website Hosting:
http://www.dghosting.co.uk
User avatar
Craig_Anto3
Posts: 617
Joined: Sun Feb 17, 2002 12:00 am
Location: Bristol
Contact:

Post by Craig_Anto3 »

new ant: This Ones M too

M2 clone pneumatic flipper sozbot controller driving 2 scaletrix cars for drive titanium flipper and roll over shell so quick powerful well armoured neat weapon

millitant killer
Andrew
Posts: 6
Joined: Mon Sep 30, 2002 12:00 am
Location: Reading

Post by Andrew »

I,m just about to start on Cypher. 2 park-fly aircraft motors and gearboxes for drive, Li-Poly batteries, polycarb and ali armour. Should be good. Also, my Dad's got a new ant, unnamed as yet, but its got Naro Hp's for drive, a lifting scoop and is made out of Balsa, ali and polycarb.
engr
Posts: 40
Joined: Thu Feb 14, 2002 12:00 am
Contact:

Post by engr »

my next and proberbly last ant will be Serpent Evo, it will be machined etc and made well, i hope.

i dont really have time to continue building ants as i have other commitments (band and 6th form) but im definatly not leaving all together, oh and i will be sorting out ed the duck so he is battle worthy again :smile:

Chris Lane
Henning
Posts: 4
Joined: Tue Sep 16, 2003 12:00 am
Location: Netherlands

Post by Henning »

Hi,

I?m currently building on 2 ant:

WarAnt

A pneumatic flipper with 2 speedhacked 5.4 gr servo's and a 4.5 gr receiver. Max pressure 2.5/3 bar
6.0 volt 23 gr 200 mamp Nihm

Movies:

http://www.home.zonnet.nl/jansenklomp14/PCDV0085.AVI
http://www.home.zonnet.nl/jansenklomp14/PCDV0108.AVI
http://www.home.zonnet.nl/jansenklomp14/PCDV0111.AVI

My second antweight is a job for somebody else.

It is a FBS-ant with a 100mm 35 gr shell, 2 5.4 gr servo's, 4 or 5 cell 200 mamp battery pack.
Antidote
Posts: 28
Joined: Mon Apr 08, 2002 12:00 am
Location: Bristol
Contact:

Post by Antidote »

looks great
shame the names take
good luck
if you want help with the pneumatics
give me a buzz
chris@c2robotics.co.uk


_________________
http://www.c2robotics.co.uk

<font size=-1>[ This Message was edited by: Antidote on 2003-09-16 19:25 ]</font>
Mark
Posts: 6
Joined: Fri Feb 22, 2002 12:00 am
Location: Essex
Contact:

Post by Mark »

Hi, Henning,
i'd like to tell you on behalf of my brother, ben that he's had that name for a couple of years now, and wants to keep it at the mo. Good luck in finding a new name, ANTi-Gravity is free and sounds good.
<img src="http://www.antweight.co.uk/results/ws11 ... P_0148.jpg" height="150" width="150">
Mark.


<font size=-1>[ This Message was edited by: Mark on 2003-09-18 19:18 ]</font>
Locked