New Robots

All things antweight

Moderators: BeligerAnt, petec, administrator

Locked
User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Post by peterwaller »

If its finished and works ok I might try it out at AWS17
Raizor
Posts: 101
Joined: Fri Apr 12, 2002 12:00 am
Location: Ireland
Contact:

Post by Raizor »

Pete, Is this the one using the Motors and Wheels From Inertia Labs?
The Irish Guy
Website Hosting:
http://www.dghosting.co.uk
User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Post by peterwaller »

Yes the 50:1 gearbox ones. The Saturn 62 servo's just were not up to it.
User avatar
Craig_Anto3
Posts: 617
Joined: Sun Feb 17, 2002 12:00 am
Location: Bristol
Contact:

Post by Craig_Anto3 »

as i said in names 2 new bots.

Thwack-Man:- Pneumatic Axe bot Naro drive hi speed modded single lipo cell , notbuilt yet but fully cadded and parts are on there way.

Fish and Chips:- cluster bot both have 2 wheels however there inline not side by side basicly looks like a snake because it bends to turn both are ram bots but thought it was an interesting design to try, and unlike Ian's cluster both mine will fit in the cube at the same time
Raizor
Posts: 101
Joined: Fri Apr 12, 2002 12:00 am
Location: Ireland
Contact:

Post by Raizor »

Mine did except the cube I used was cardboard so it flexed a bit not like olivers
The Irish Guy
Website Hosting:
http://www.dghosting.co.uk
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

i have redesigned shovit(yes i kno i said it somewhere else but who cares)

it is tiny and weighs 110 grams

how on earth do i put a pi in my post[/img]
Adam Hargreaves
Posts: 223
Joined: Sat Apr 30, 2005 9:25 am
Location: Loughborough
Contact:

Post by Adam Hargreaves »

josh, u need to put ur pic on an online hosting thing (try www.photobucket.com -it's what I use) and then in your post, use the following tag (without spaces)

[img ]http://www.domain.com/image.jpg[ /img]
Team 'In Theory'
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

ok then try dis

Image
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

oops sorry peeps with a slow intel connection
User avatar
Simon Windisch
Posts: 1806
Joined: Tue Apr 15, 2003 12:00 am
Location: Reading
Contact:

Post by Simon Windisch »

Looks good (if a little large)

I would suggest that you make the front ground clearance a little lower. Perhaps with some acetate foil.

Simon
Locked