NanoTwo Kits

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
Derek Dudge
Posts: 135
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge »

There's gonna be a lot of new antweights around soon it seems :o

All good! For my purposes I do believe one of the older ones will work just fine, my transmitter is already set for dsm2 anyways. Order placed!
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

10 more NanoTwo V3s are up for sale: https://nutsandbots.co.uk/product/nanotwov3dualesc/
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Paulmchurd
Posts: 227
Joined: Sun Dec 10, 2017 4:39 pm

Re: NanoTwo Kits

Post by Paulmchurd »

Any plans to make dual esc with no built in reciever?

For poor people like myself that invested in a transmitter before knowing about your ESC’s. Costly upgrade but it seems inevitable 😫
JMD
Posts: 106
Joined: Mon Jun 01, 2015 9:57 am

Re: NanoTwo Kits

Post by JMD »

Hello Rory

Will you be getting any more NanoTwo V2/V3 In Stock?.

Thank JMD
sgtbeardy
Posts: 15
Joined: Wed Jan 31, 2018 12:28 pm

Re: NanoTwo Kits

Post by sgtbeardy »

Hey Rory, I've just received my NanoTwo v3 today - thanks!! I noticed the servo voltage connector is now 7.2v instead of 5v. Does anybody know what would happen if I plugged a Tower Pro MG90S servo in here? Is the 7.2v too much for it? Cheers.
Team Beardy Bots: Last Minute, Set Myself on Firestorm, Almost Certainly Balanced, Yin and Yang.
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

Yeah MG90s aren't keen on 7.2v. The V3 was aimed at the high voltage servos which are now becoming common in the sport. You'll either have to get a servo that can handle the voltage, or get a 5v BEC to run the servo.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
sgtbeardy
Posts: 15
Joined: Wed Jan 31, 2018 12:28 pm

Re: NanoTwo Kits

Post by sgtbeardy »

I guess I'm ordering a 306G-HV then. :D
Team Beardy Bots: Last Minute, Set Myself on Firestorm, Almost Certainly Balanced, Yin and Yang.
Rogg
Posts: 1
Joined: Fri Jun 26, 2015 10:56 am

Re: NanoTwo Kits

Post by Rogg »

I have an older NanoTwo and it's great, however I much prefer tank style steering. Is there any plans to make these available without mixing?
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

No, however it can be achieved fairly easily using the mixing on the TX to negate the built in mixing.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Zanbots
Posts: 24
Joined: Sat Feb 03, 2018 8:01 pm

Re: NanoTwo Kits

Post by Zanbots »

What's the best way to get hold of Alex or Rory regarding repairs? My friend has sorted out his brand new V3 when checking it over.
Jeremy Hall
Ants; 24601
Oh, Baby!
B-Bot
Valjean
Post Reply