TinyTwo Speed Controllers

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: TinyTwo Speed Controllers

Post by Rapidrory »

Yeah, I've got plenty in stock :)

Have a read of the datasheet and let me know what options you want: https://docs.google.com/document/d/19oF ... sp=sharing
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Roboteernat
Posts: 109
Joined: Fri Oct 05, 2012 12:37 am
Location: Eastleigh, nr Southampton
Contact:

Re: TinyTwo Speed Controllers

Post by Roboteernat »

Just took a look, and the N2LVHP seem the best options for me, could I place an order for 2 of these please, my email address is npoate @ hotmail.com if you could send PayPal details I can get that sent to you today! Postage will be to Bristol, bs32 4rt so £52 I believe? Thank you
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
Roboteernat
Posts: 109
Joined: Fri Oct 05, 2012 12:37 am
Location: Eastleigh, nr Southampton
Contact:

Re: TinyTwo Speed Controllers

Post by Roboteernat »

Payment sent and options emailed. Been looking at adding my dealt and rx on them, or my 3 channel rx,.

I know there was mention of issues with the deltang rx with these but it was said it was the rx at fault? Page 7 of this topic

Thanks

Nat
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: TinyTwo Speed Controllers

Post by Rapidrory »

Cheers, I'll get that sorted asap.

And yeah, they work fine with Deltangs as long as the Deltang works :P
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: TinyTwo Speed Controllers

Post by haz »

Hey,

How tall would a N2LVHP esc be? And would it be possible to have a lemon rx stuck on it?

Thanks.
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: TinyTwo Speed Controllers

Post by Rapidrory »

An N2LVHP is about 8-9mm thick.

Yes it would be possible: with a Lemon Rx attached, it'd go up to about 10-11mm thick.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: TinyTwo Speed Controllers

Post by haz »

Hmm righto. Expect an order from me when I get paid I think :) I have 10mm internal height to play with so if it can fit into that that's fantastic.
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: TinyTwo Speed Controllers

Post by Rapidrory »

I'm sure it could be squeezed in :L What motors/ how many are you using? A regular N2LV is thinner and will deal with anything apart from 4 HP motors...
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: TinyTwo Speed Controllers

Post by haz »

4 30:1 regular non hp unsalted low fat motors. Got them from Will's site.
EpicentrE
Posts: 831
Joined: Mon Jun 09, 2003 12:00 am
Location: Coventry
Contact:

Re: TinyTwo Speed Controllers

Post by EpicentrE »

And as long as you're not running on 3 cells ;)
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk
Post Reply