Epic Robotics

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
User avatar
peterwaller
Posts: 3190
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Epic Robotics

Post by peterwaller »

This forum and Antweights in general need more of this creativity welcome back.

User avatar
MarkR
Posts: 340
Joined: Mon Dec 18, 2017 12:46 pm
Location: Reading Hackspace
Contact:

Re: Epic Robotics

Post by MarkR »

Scott, that is super amazing.

So it's an in-wheel brushless motor/gearbox?

Did you use the Hackspace 3d printer? Or your own one?

The Hackspace Ultimaker 2+ is actually quite nice.

What about the electronics? Did you get some reversible brushless controllers? Maybe we need to design some custom electronics?
Robots: Betsie - RaspberryPi controlled flipper bot with gyro stablisation - too clever for her own good?
Stacie - tidy flipper; 4wd driven by hair bands

EpicentrE
Posts: 829
Joined: Mon Jun 09, 2003 12:00 am
Location: Coventry
Contact:

Re: Epic Robotics

Post by EpicentrE »

Yup! Smaller and lighter than an N20 on it's own, never mind that it's also a wheel.

The parts were ordered from Shapeways; they are too thin to print well on FDM machines really. I did some test prints with my home printer and wasn't happy with the strength of them. The smaller of the pieces that encloses the gearbox is only 1mm at it's thickest point.

Electronics wise, I've ordered some of these to test out: https://www.unmannedtechshop.co.uk/teen ... -in-1-esc/, which I'd need to run two of as I'm going 4wd.

Ideally for 4wd, I'd like one of these: https://fishpepper.de/projects/tinypepper2/, but there's only one store making and selling them at the moment, and they're US based.
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk

User avatar
MarkR
Posts: 340
Joined: Mon Dec 18, 2017 12:46 pm
Location: Reading Hackspace
Contact:

Re: Epic Robotics

Post by MarkR »

I expect we can print them using some clever techniques, perhaps with the PA-CF (carbon fibre) filament at Rlab. Message me if that sounds interesting.
Robots: Betsie - RaspberryPi controlled flipper bot with gyro stablisation - too clever for her own good?
Stacie - tidy flipper; 4wd driven by hair bands

User avatar
GeorgeR
Posts: 275
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: Epic Robotics

Post by GeorgeR »

Looks great, it'd be nice to see brushless drive working in an ant.
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker

Post Reply