Earthwormjim's Stuff
Moderators: BeligerAnt, petec, administrator
Re: Earthwormjim's Stuff
I don't see why it wouldn't be allowed. There's plenty of Antweights that don't even have external power switches, with people needing to reach inside them to plug in/unplug a battery. As long as you're not having to put your hand next to a spinner to do it I hardly see the issue, tool or not.
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk
http://www.epicrobotics.co.uk
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: Earthwormjim's Stuff
Thanks Dave!
I bought the 12A esc's for the Fridge, as they ran 4S. Then I put them in Fantom, to push it with the added downforce. (A bit of overkill, I know!) But they are nice units, and pretty cheap for what they are, AFAIK?
Not sure about the switch rules?? It does require an allen key to turn the robot on/off. Does this mean that is is technically illegal??
I bought the 12A esc's for the Fridge, as they ran 4S. Then I put them in Fantom, to push it with the added downforce. (A bit of overkill, I know!) But they are nice units, and pretty cheap for what they are, AFAIK?
Not sure about the switch rules?? It does require an allen key to turn the robot on/off. Does this mean that is is technically illegal??
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: Earthwormjim's Stuff
Thanks Scott. I agree. I must admit that I would probably hesitate to put one on a spinner though. But it is a nice little unobtrusive unit for a non dangerous robot.
One dilema I have been struggling with is the scoop design.
I wanted the ability to shoot forward, past an opponent, then back into them still having an effective scoop at the back to use. But by doing that, if something does get under the front, the rear scoop will beach the robot, lifting the rear wheels off the ground, rendering the whole thing un-maneuverable. I am happy to trial and error the idea, but judging by the current scoop designs, not many of which has a backwards effective scoop edge, I presume that it may be an issue. If I get time, I will make another set of scoops with a lower top edge, so that it wont beach if lifted. Any one had any design failiures with scoop shape / sizes etc??
One dilema I have been struggling with is the scoop design.
I wanted the ability to shoot forward, past an opponent, then back into them still having an effective scoop at the back to use. But by doing that, if something does get under the front, the rear scoop will beach the robot, lifting the rear wheels off the ground, rendering the whole thing un-maneuverable. I am happy to trial and error the idea, but judging by the current scoop designs, not many of which has a backwards effective scoop edge, I presume that it may be an issue. If I get time, I will make another set of scoops with a lower top edge, so that it wont beach if lifted. Any one had any design failiures with scoop shape / sizes etc??
Re: Earthwormjim's Stuff
2c) Robots must have an externally accessible way of being shut down (e.g. a power switch, removable link or battery plug).
A battery plug that can be gotten at from outside (even lifting up a flipper) counts, but I dunno about having to use a tool. I would suggest asking Gary or another member of the comitee (I am one, but I would be happy to let it slide because it's a pusher), however I would imagine they'd be ok with it providing you disarmed it (dunno how sharp the scoops or whatever are).
A battery plug that can be gotten at from outside (even lifting up a flipper) counts, but I dunno about having to use a tool. I would suggest asking Gary or another member of the comitee (I am one, but I would be happy to let it slide because it's a pusher), however I would imagine they'd be ok with it providing you disarmed it (dunno how sharp the scoops or whatever are).
Re: Earthwormjim's Stuff
Dave, this is an instance where we have to make a ruling of rules vs common sense. I'd always FAR rather go with common sense.
These are Antweights. You'd have trouble causing injury to someone with Jim's robot without throwing it at them really hard, unless the scoops are razor sharp, which I doubt. Being anal about a rule that is primarily designed for safety under these circumstances is pointless.
If someone would really enforce this at an event they were running I would suggest they applied their skills to somewhere more suitable, like a managerial position in local government.
These are Antweights. You'd have trouble causing injury to someone with Jim's robot without throwing it at them really hard, unless the scoops are razor sharp, which I doubt. Being anal about a rule that is primarily designed for safety under these circumstances is pointless.
If someone would really enforce this at an event they were running I would suggest they applied their skills to somewhere more suitable, like a managerial position in local government.
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk
http://www.epicrobotics.co.uk
Re: Earthwormjim's Stuff
Nice bot! I like the way you sort of carved 23 into the top, instead of just painting it.
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Earthwormjim's Stuff
I CAN get to the power link inside most of mine with my hands but often use a screwdriver to pull it out for ease. I don't see the difference between this and Jim's switch really.
Die Gracefully Robotics
Winner - AWS 39
Winner - AWS 39
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: Earthwormjim's Stuff
Hi Haz!haz wrote:Hi Jim!
- terminaldamage
- Posts: 180
- Joined: Wed Jan 20, 2010 9:54 pm
- Location: Aberdeen, Scotland
- Contact:
Re: Earthwormjim's Stuff
Depends on the interpretation of the rules too:
Nice robot, has a distinctive F1 feel too it
23 has a way of being shut down (a power switch) and the switch is accessible from the outside, you don't need to go into the robot to turn it off. Seems to conform to the rules looking at it from that angle. But at the end of the day as has been mentioned, common sense/logical judgement is the best rule to enforce.2c) Robots must have an externally accessible way of being shut down (e.g. a power switch, removable link or battery plug).
Nice robot, has a distinctive F1 feel too it
Jamie McHarg
RogueTwo Robots
www.rogue-two-robots.vze.com
With great power, comes great reliability.
RogueTwo Robots
www.rogue-two-robots.vze.com
With great power, comes great reliability.
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: Earthwormjim's Stuff
Sounds good to me gentlemen.
IMHO, a spinner which needed a tool to turn it off would be unacceptable. But in a pusher is not an issue.
I think that if the need arose to clarify the rule, then it might make sense to outlaw "tool" switches altogether, otherwise we would need to specify which switches are okay for which robot, which could get over complicated.
Long live common sense!
IMHO, a spinner which needed a tool to turn it off would be unacceptable. But in a pusher is not an issue.
I think that if the need arose to clarify the rule, then it might make sense to outlaw "tool" switches altogether, otherwise we would need to specify which switches are okay for which robot, which could get over complicated.
Long live common sense!