L.W.S Robotics build diarys

All things antweight

Moderators: BeligerAnt, petec, administrator

tweedermeister
Posts: 67
Joined: Sun Nov 13, 2011 1:08 pm
Location: isle of sheppey, kent

Re: L.W.S Robotics build diarys

Post by tweedermeister »

Maidstone went quite well, hot glue will be non existent on my new antweight as at maidstone it was just too unreliable so the next antweight will be vacuum formed and bolted together. It will also be a mini kronic, what is the best metal gear servo for antweight flipper use ?

tweedermeister
Posts: 67
Joined: Sun Nov 13, 2011 1:08 pm
Location: isle of sheppey, kent

Re: L.W.S Robotics build diarys

Post by tweedermeister »

starting the build on the new ants tomorrow with this design for a rammer:
http://gametechmods.com/uploads/images/ ... 0Shell.jpg
2 50:1 pololu motors for drive, botbitz 12a esc's lipo battery, 2mm hdpe top and base, 4mm sides, the sides and back will be one solid piece of hdpe bent into shape using a heat bar, the wedge will be a piece of 2mm aluminium bent into shape.
If I get permission from the builder the build on mini kronic will also start ASAP.
what servo (preferably metal geared) would you guys reccomend for a very powerful flipper ?

Post Reply