RobotWars101

for a good solid reliable and cheap servo go for the towerpro mg92b... make sure its a genuine one (servoshop has the real ones) out of 6 i purchased over a year ago, 5 are still going strong... they have been through multiple events as well as much much practising and seeing how many stacked tins o...

never mind... on second check it seems like pin 7 on both has no track leading to it...

you can probably see better than me, but in your pic it looks like pins 7 and 8 on both R and L look like they are connected...

im just guessing that you have probably already looked into that though, but just in case...

i can really notice the difference... i didnt notice it being slow, but was a bit peeved with the site going down every so often, but now the change its really noticeable just how fast it is now... good job...

should be renamed smokey and the bandit

with nothing attached, the be 1806 is pretty quiet if its well balanced... add a bar/disk and you will get that hum as it cuts through the air

having not used your brushless esc i am unsure, but it looks as though it has no bec to send power to the receiver... if your receiver can take 2s voltage (flysky fs2a? if so yes) then a bec wouldn't be necessary, however, i dont know if the esc's on the n20's support 2s voltage. so it looks like a ...

what size wheels have you made? i am after some 32mm ones like the pololu ones but with a flat tread instead of the rounded tread...

but... i would need about 40 of them...

hey, i thought why we are all on lockdown many of us may be using this time to build/rebuild bots... however, with the current situation, getting parts in may be tricky... so i figured why not see if people would trade parts here... something like i have these parts but i am in need of those parts.....

just thought i would add, if you look closely at the back of an n20, inside a circle will have a little + so you can see the polarity without needing to test.

as far as im aware they all have this (every one of mine has)