Servo straight to battery

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: petec, administrator, BeligerAnt

Post Reply
User avatar
tomboys
Posts: 15
Joined: Mon Apr 23, 2018 7:17 pm
Location: Milton Keynes

Servo straight to battery

Post by tomboys » Sat Aug 25, 2018 4:07 pm

Just wanted to check that I'm right in assuming that if I'm going to wire the Servo straight to the battery, I just have to cut the positive and negative wires that would normally go to the receiver and connect them straight to the battery.
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot (under construction)

User avatar
peterwaller
Posts: 3692
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: Servo straight to battery

Post by peterwaller » Sat Aug 25, 2018 5:51 pm

You can leave the negative wire and just move the red wire to the battery plus but after the switch or where it can be turned off.

Post Reply