DasMikro and Flipping Servo

All things antweight

Moderators: petec, administrator, BeligerAnt

Post Reply
MrEnDo
Posts: 16
Joined: Mon Jan 15, 2018 9:39 am

DasMikro and Flipping Servo

Post by MrEnDo » Sat Jun 09, 2018 9:50 am

Hi All,

I have built a basic robot on cardboard ahead of doing proper... Question about servos

How do I wire in the servo does it need dedicated power then the signal wire off to the receiver.

Cheers

User avatar
DieGracefullyRobotics
Posts: 118
Joined: Mon Apr 02, 2018 7:39 am

Re: DasMikro and Flipping Servo

Post by DieGracefullyRobotics » Sat Jun 09, 2018 10:28 am

Hi.
Yes, that's pretty much it if you're running off a DasMikro for drive. Signal wire to the reciever (usually in the throttle slot, though some use rudder) then the power wires into the battery circuit.
Dave
Die Gracefully Robotics - Barely Even a Proper Team.

MrEnDo
Posts: 16
Joined: Mon Jan 15, 2018 9:39 am

Re: DasMikro and Flipping Servo

Post by MrEnDo » Sat Jun 09, 2018 10:56 am

Cheers dude. I don't mean the DasMikro I'm referring to the weapon or is this what your talking about.

User avatar
DieGracefullyRobotics
Posts: 118
Joined: Mon Apr 02, 2018 7:39 am

Re: DasMikro and Flipping Servo

Post by DieGracefullyRobotics » Sat Jun 09, 2018 11:56 am

Yes sir, I just mean because other speed controllers with a built in reciever have a place to plug in a servo but the DasMikro does not so you have to wire it in in the way you suggested :D
Dave
Die Gracefully Robotics - Barely Even a Proper Team.

MrEnDo
Posts: 16
Joined: Mon Jan 15, 2018 9:39 am

Re: DasMikro and Flipping Servo

Post by MrEnDo » Sat Jun 09, 2018 12:43 pm

Legend, yep got it connected and working fine...

Now to decided to stick to servo or use a motor instead. As the servo doesn't seem that powerful.

Post Reply