NanoTwo Kits

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
User avatar
GeorgeR
Posts: 280
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR »

You need to swap the wires on the motor that runs backwards when you push the stick up (if I've pictured this correctly it's the left one).
For future reference it's worth hooking up the motors before soldering to check they are the right way around.
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker
Dazmund
Posts: 40
Joined: Wed Dec 27, 2017 10:38 pm
Location: Deptford, London
Contact:

Re: NanoTwo Kits

Post by Dazmund »

Cheers George. It's all good now. All I got to do now is figure out the best way to mount a weapon servo!
DAZ DUZ BOTZ

Fili-PA (wedge flipper)
Watta Doze (tank tracked pusher)
Wolfhead (front wheel drive flipper)
2-2 Liftman (fork lifter)
The Ting Goes Grrrab (grabber/control)
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

I've finished the first of the production NanoTwo V3s. About 20% smaller than the V2s, they support DSMX as well as DSM2, and include a bind plug and a servo plug for 7.2V servos to be driven directly. Hopefully be on sale in the next week or so.

Image
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
User avatar
GeorgeR
Posts: 280
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR »

Wow, the NanoTwo was already the best antweight esc, but to add dsmx functionality and make it smaller as well is remarkable! I'm sure they'll be a great success.
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker
Derek Dudge
Posts: 135
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge »

Awesome. Definitely getting me one, will keep an eye on the site. New build project ahead!
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
User avatar
FoxFire
Posts: 6
Joined: Mon Dec 04, 2017 5:47 pm
Location: Dundee
Contact:

Re: NanoTwo Kits

Post by FoxFire »

That will be useful, I could use one of those. :)
Mark Smith - Team Frey
Polaris (Front Hinge Flipper)
Proxima Centauri (Rambot)
Sprocket Raccoon (Lifter/Rambot)
Fighting Fox (Flipper)
Mcmad
Posts: 13
Joined: Wed May 17, 2017 6:32 am

Re: NanoTwo Kits

Post by Mcmad »

Likewise keeping my eye open as struggling to solder neat enough to connect the RX wires onto a dasmikro.

Jeff.
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

The new NanoTwo V3s are now available on Nuts and Bots: https://nutsandbots.co.uk/product/nanotwov3dualesc/

I've still got parts for another 15 V2s in stock, so I'll be making those when I get time just to use up the parts, and they'll be listed on Alex's store at a reduced price: https://nutsandbots.co.uk/product/nanotwodualesc/
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Derek Dudge
Posts: 135
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge »

Awesome news.

It's very cool that you got such a key component down to such a low weight. Ohhh, and I'm assuming (hoping!) that the stock amount just wasn't updated for the new ones yet? Or did I miss them already! hehe

Take my money already, damn you :D
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory »

You must have missed them I'm afraid; all 12 sold out in 70 minutes! Working on another 10 now..
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Post Reply