Upgrading to lipo, other electronics needed.
Moderators: BeligerAnt, petec, administrator
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Upgrading to lipo, other electronics needed.
I see thankfully the servo boards I'm using are standard size ones.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
-
- Posts: 441
- Joined: Mon Mar 03, 2014 7:01 pm
Re: Upgrading to lipo, other electronics needed.
When you test, be sure to rapidly move the control stick back and forth. I found that a couple of the standard size boards we use stuck on full forwards while others didn't. Hence, we don't run on full LiPo voltage but regulate down to around 6V which does the trick nicely so this is an option if required.
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Upgrading to lipo, other electronics needed.
Oh ok, thanks for the heads up
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).