Brighton Modelworld 2008 - 15th-17th February

Place discussions about upcoming events here in this thread.

Moderators: BeligerAnt, petec, administrator

Post Reply
User avatar
olivers
Posts: 533
Joined: Thu Feb 14, 2002 12:00 am
Location: Reading
Contact:

Post by olivers »

2.4Gz and either 40.935 or 40.925.

I can sort out with Josh any clashes and lend him some crystals if needed.
User avatar
petec
Posts: 555
Joined: Wed Jan 23, 2002 12:00 am
Location: Burgess Hill, West Sussex
Contact:

Post by petec »

.67, .66, .89
------------
RobotWars101.org
RobotWars101.co.uk
Antweights.com
Antweights.co.uk
AntweightWorldSeries.com
User avatar
petec
Posts: 555
Joined: Wed Jan 23, 2002 12:00 am
Location: Burgess Hill, West Sussex
Contact:

Post by petec »

Gary - do you want a lift down on Thurs eve again? What time are you going down? I've got to do the Brownie run at 5.30 but am free from then on.
------------
RobotWars101.org
RobotWars101.co.uk
Antweights.com
Antweights.co.uk
AntweightWorldSeries.com
razerdave
Posts: 1565
Joined: Mon Jan 02, 2006 9:40 pm
Location: Carterton, Oxfordshire
Contact:

Post by razerdave »

Freq. .825 and .725 (I have a spare TX Xtal for you josh)

I know it will clash, we just need to be careful not to run at the same time: Remember Stewie and Boo at AWS 24 in the Tag Team ?
User avatar
BeligerAnt
Posts: 1872
Joined: Wed May 15, 2002 12:00 am
Location: Brighton
Contact:

Post by BeligerAnt »

The stand is built. :) Good job Leo and Tim can't make it as it's a bit cosier than last year. They haven't quite given us all the space I asked for. :(

FYI the neighbours are Oliver with his R2-D2 and a bunch of Lord Of The Rings wargamers.

You will need to pick an exhibitors badge up from me or the folks on the desk (if I can persuade them to look after them). I should be there from about 9am. Let me know if you plan to arrive earlier!

Go in the back entrance (in Russell Road) not the seafront entrance (you have to pay that way!). Go down the stairs, follow the left-hand wall and you will find us. (Same place as last year if that helps.) Stand 35.
Gary, Team BeligerAnt
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

meh one of the speedos in boo doesnt work does anyone have a spare set of scorp minis i can borrow for the weekend or banebots dont mind.
RPD International
www.RPDintl.com
User avatar
Simon Windisch
Posts: 1806
Joined: Tue Apr 15, 2003 12:00 am
Location: Reading
Contact:

Post by Simon Windisch »

Thanks for organising this Gary. We had a great time, as usual.
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

hey

was great fun thanx to everyone whol organised it lots of interest both days =]
RPD International
www.RPDintl.com
User avatar
olivers
Posts: 533
Joined: Thu Feb 14, 2002 12:00 am
Location: Reading
Contact:

Post by olivers »

That was a good weekend, bit busy though.

Thanks to everyone that helped out with the R2D2 stand, I think everyone that wanted got a go with the beeper. Was fun watching small children wave their arms around trying to get the sounds to go off.
User avatar
petec
Posts: 555
Joined: Wed Jan 23, 2002 12:00 am
Location: Burgess Hill, West Sussex
Contact:

Post by petec »

Good stuff and hopefully some good new contacts - only time will tell. Pants on AAAs seems to run for about 3 hours....shame the Tx battery doens't :-)

Big thanks to Gary and family for putting in most of the work. Good luck to Bethany driving Pants at the next AWS....I hope to see lots of pics as well as the video...

Gary, the Tx for Pants probably needs a nice long gentle charge, but the lipos should be ok. The video camera hasn't been used for a while so will need charging...there should be two batteries there. They don't hold charge brilliantly so there would be no point me doing it before I gave it to you.
------------
RobotWars101.org
RobotWars101.co.uk
Antweights.com
Antweights.co.uk
AntweightWorldSeries.com
Post Reply