team hectic fleaweight build diary.

All things small and scratchy.

Moderators: BeligerAnt, petec, administrator

Post Reply
AntRoboteer
Posts: 441
Joined: Mon Mar 03, 2014 7:01 pm

Re: team hectic fleaweight build diary.

Post by AntRoboteer »

Remote-Controlled Dave wrote:I remember Hoondal. I nearly lost to it. Lol
...and then completely destroyed it! :-) I never really had any chance at all with that one.
Hogi wrote: now that i've left school and finished my summer temporary job, i'll have plenty of time to do practise driving sessions so hopefully i'll be able to put on at least a reasonably alright driving performance this time. :)
Yes, it is nice to have left school! I've just had my first week off and I too have been looking over my robots, deciding what to do with them. The overall verdict is: everything needs to be rebuilt. I guess it's a good thing I can't make it to AWS 47 then... :-(
Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: team hectic fleaweight build diary.

Post by Rapidrory »

I'm hoping to squeeze in some driving practice, but more expecting to just pull the old 'EOs never do well at their own events' card and just settle for breaking as much as possible in 6 spinner matches I'll have :L
Going slightly back to the topic, I'm hoping to also get a fleaweight spinner going out of the remains of the original Why Wait (was only 100g or so originally), so if I get time then that could be fun :)
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Hogi
Posts: 1002
Joined: Sun Dec 30, 2012 6:47 pm
Location: basingstoke

Re: team hectic fleaweight build diary.

Post by Hogi »

i was originally going to build a fleaweight spinner for the last entry of my fleaweight team but i never bothered as i thought it'd be too much of a challenge considering it takes all my intelligence and will power just to squeeze a basic box wedge pusher into the three inch cube. one thing i have noted is that my fleaweights usually end up being very underweight. fleadom fighter has recently had it's side armour bulked up to 3mm and a new front mounted stanley knife blade added, 360 no scope now has 5mm side armour and the new one has 3mm front and side armour, 2mm rear armour and a 2mm lid pannel.
Daniel Jackson.

Team Hectic.

Many antweights

Super antweights: territorial.

Fleaweights: fleadom fighter, gaztons.

Featherweights: hectic (under construction)
Hogi
Posts: 1002
Joined: Sun Dec 30, 2012 6:47 pm
Location: basingstoke

Re: team hectic fleaweight build diary.

Post by Hogi »

i made a start on my summer robot project today. i decided to not bother with U.N.I.T cluster any more as i need the botlets in tact for the main AWS and they're not competitive or interesting anyway. instead i'm going to build a fleaweight walker grabber with expanding acetate. here's the designs and a picture of how far i've got with it.
Attachments
HNI_0095_MPO.JPG
HNI_0095_MPO.JPG (81.15 KiB) Viewed 30429 times
HNI_0094_MPO.JPG
HNI_0094_MPO.JPG (99.13 KiB) Viewed 30429 times
Daniel Jackson.

Team Hectic.

Many antweights

Super antweights: territorial.

Fleaweights: fleadom fighter, gaztons.

Featherweights: hectic (under construction)
AntRoboteer
Posts: 441
Joined: Mon Mar 03, 2014 7:01 pm

Re: team hectic fleaweight build diary.

Post by AntRoboteer »

Now that looks impressive! Good luck with that one; can't wait to see it when it's finished. :-)
Post Reply