Will's Nanoweights
Moderators: BeligerAnt, petec, administrator
Re: Will's Nanoweights
Inertia XT has its new stainless steel disc. However at 9g it puts it overweight so won't be in the comp but it's very fun to test
http://youtu.be/IRu02Ui5Bcw
http://youtu.be/IRu02Ui5Bcw
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Will's Nanoweights
How many grams overweight is it Will? Wonder if you could use it in the cluster. Mine is only 22g, so there's 3g spare.
Die Gracefully Robotics
Winner - AWS 39
Winner - AWS 39
Re: Will's Nanoweights
I need to check on some better scales but it's around 29-31g
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Will's Nanoweights
Thought I should post my latest line up of Nanoweights
Reducto has had one small change with a new custom mix on the TX- has a lot more speed now.
I have also finished 2 new ones- Pinchy and Lumos 2 both of which are very fun to drive
And some videos
http://youtu.be/x45nfNOdcZk
http://youtu.be/aBa2OGoNvY0
Also decided to replace inertia XT with a new spinner which will form a cluster botlet with Inversion- it's only a basic test mockup at the moment as I'm going to print a proper chassis for it.
http://youtu.be/gn9OoKtXwp4
Reducto has had one small change with a new custom mix on the TX- has a lot more speed now.
I have also finished 2 new ones- Pinchy and Lumos 2 both of which are very fun to drive
And some videos
http://youtu.be/x45nfNOdcZk
http://youtu.be/aBa2OGoNvY0
Also decided to replace inertia XT with a new spinner which will form a cluster botlet with Inversion- it's only a basic test mockup at the moment as I'm going to print a proper chassis for it.
http://youtu.be/gn9OoKtXwp4
Re: Will's Nanoweights
The new Inertia XT is looking awesome any luck getting the weight down?
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Will's Nanoweights
Thanks, the weight is still around 30g so I've given up making it into a proper nano- I'm currently printing the new chassis which will see it paired up with one of my ants (probably Inversion).
The disc actually packs a fair punch though and part of me is considering making another to use as a fleaweight cluster
The disc actually packs a fair punch though and part of me is considering making another to use as a fleaweight cluster
Re: Will's Nanoweights
I'm sure it's doable; If you can get the weight of the whole spinner mechanism (servo board, motor and blade) down to about 18-19 g then you could get it in the weight limit. Though having it as a flea weight cluster sounds more interesting; maybe just make some other 40g non spinner to go with it to make things a bit easier.
I still don't know how that disc is 12g... that's the same as the disk on HSOD! What did you make it out of, depleted uranium? :L
I still don't know how that disc is 12g... that's the same as the disk on HSOD! What did you make it out of, depleted uranium? :L
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Will's Nanoweights
You bringing your Nanos along tomorrow? I need to test out the new Mini Dozer..
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc