A discussion forum for proposed changes to the AWS rules
Moderators: petec, administrator, BeligerAnt
- Posts: 2461
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
3a) All battles must take place in a battle box, regardless of weapons being used in the battle (a minimum of 1mm thick polycarbonate is recommended for indirect contact with the robots. For direct contact, a minimum of 4mm thick polycarbonate is recommended).
If we are considering an update/rewrite of the rules, I would also suggest an update to the recommendations in rule 3a.
1mm polycarb really isn't enough to contain some of Mr Waller's monsters
(or many other spinners). I think 3mm should be the absolute minimum for everything except maybe the roof, with 4mm much preferred for all the walls whether in direct contact with the robots or not.
- Posts: 1036
- Joined: Wed Jan 23, 2002 12:00 am
- Location: Burgess Hill, West Sussex
4mm polycarb is great. 4mm styrene is also fairly strong, although it will crack if hit hard. Anything thinner (plastic or polycarb) is not effective. However, the rule about 'if the arena is in direct contact with the battlebox' is relevant. I would insist on those walls being polycarb or metal...I did mean to put metal barriers around the two closed sides of mine, as much as anything to protect the polycarb.