Just the one to start with: this done with Sketchup. Comments please.
and yes, the body shell isn't lined up very well, lol
Autonomous Robot CAD drawings
Moderators: BeligerAnt, petec, administrator
-
- Posts: 223
- Joined: Sat Apr 30, 2005 9:25 am
- Location: Loughborough
- Contact:
Autonomous Robot CAD drawings
Team 'In Theory'
The only thing i would suggest so a very good way of attaching the wheels (they appear to be lite flights) to the servo's. Idealy a completely custom hub would be best but failing that a good solid connection (i.e. more than just a blob of gloue) between the servo horn and the hub of the lite flight.
-
- Posts: 223
- Joined: Sat Apr 30, 2005 9:25 am
- Location: Loughborough
- Contact:
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Team Anticide
Lab got cancelled so no operating robot, however this is a CAD of the final design.
100mm wide, 92mm wide, 90mm high(to top of switch)
weight is going to be about 400g
http://i23.photobucket.com/albums/b352/ ... SUMoV1.jpg
120Kb
The green see through part is 1mm Alumium.
100mm wide, 92mm wide, 90mm high(to top of switch)
weight is going to be about 400g
http://i23.photobucket.com/albums/b352/ ... SUMoV1.jpg
120Kb
The green see through part is 1mm Alumium.
TEAM GEEK!