Mixing on a Dx6i

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: administrator, BeligerAnt, petec

Post Reply
Posts: 7
Joined: Mon Apr 24, 2017 11:36 am

Mixing on a Dx6i

Post by Kustom » Mon Dec 30, 2019 8:11 pm

Hi All,

More advice required :shock:

I’ve got the wiring together and using the following handy guide


Got the driving channel mixing sorted via the rudder and elevator, on my sons Devo 7e.

I’m now having issues trying the same thing with my Dx6i.
Could anyone offer advice on this please.

Thanks in advance.

Posts: 12
Joined: Wed Sep 04, 2013 5:25 pm

Re: Mixing on a Dx6i

Post by Danieljr1 » Wed Jan 01, 2020 6:26 pm

Try this...Its a bit old but I've used it since I started in robots


Posts: 7
Joined: Mon Apr 24, 2017 11:36 am

Re: Mixing on a Dx6i

Post by Kustom » Wed Jan 01, 2020 9:39 pm

Cheers for the link, it wasn’t quite what I needed but it got me to the right menu.

what I needed was:

Menu - setup list - wing tail mix - V-tail [act]

(This turns on the mixing for rudder and elevator)

disable rudder stick:
Menu- MIX1 - rudder -> rudder up -100% down -100%

Enable rudder control using aileron stick.:
Menu - MIX2 aileron -> rudder up 100% down 100%

Hope this helps someone in the future.

Ps I could have use the Elevon mix as per the video link, but my other TX (Devo 7e) has it setup to mix the aileron and Rudd so I wanted both TX to be setup the same.

Post Reply