Well, the title says it all really, has anybody run the pololu high power micro gear motors on a 4s lipo? If so, what were the results?
It appears they can handle 3s as long as they aren't stalled for any time, but I can't find any record of someone using them on 4s.
Pololu high power motors on 4s?
Moderators: BeligerAnt, petec, administrator
Pololu high power motors on 4s?
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker
- UserFriendly
- Posts: 119
- Joined: Wed Feb 18, 2015 3:52 pm
Re: Pololu high power motors on 4s?
You could use 4s on the 12v versions, but over-volting a 6v Pololu motor to 14v+ will more than double the current, draining battery and increasing heat and...
Why test one to destruction and post your results!
Why test one to destruction and post your results!
Andy B - Team UserFriendly
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.