Wanted?

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

Post Reply
Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Wanted?

Post by Occashokka »

I know me being me this may or may not come to fruition based on budget but i was wondering if anyone would be able to either 1)speed hack this for me https://hobbyking.com/en_us/corona-ds-3 ... s-34g.html so i could have a decent 1/1.5kg of torque and have liek 0.02 crazy quick flipper or if 2)anyone had any old edfs that they dont want anymore that i could purchase significantly cheaper than the normal price?
Sorry im needy but ive got some crazy cool plans and after all, someone needs a flipper better than space-Y and a pusher than can out push anything/fly and possibly but unlikely,both on the same bot. Question 3 which is totally not related to the edf is can an edf and esc and a standard 9g servo can just be both spliced onto the servo plug on the nano esc without troubles.
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: Wanted?

Post by Shakey »

Image
Image

I have this one 32g and 43mm diameter. Just a warning it is power hungry, I can send an XT30 connector with it as it'll melt a JST.
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Re: Wanted?

Post by Occashokka »

Nice I'll check with my dad and we can organise a fee, also do all Servos speed hack the same or is it model specific?
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P
Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Re: Wanted?

Post by Occashokka »

Provided it will work with the 10A esc in buffy it will all be good, except the battery is hard wired on because reasons so as long as the switch doesn't break with heat then yes please mr shakey sir
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: Wanted?

Post by Shakey »

Yeah you'll want more in the 20-30A range and a 300mah+ (preferably around 400) battery for this one.
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Post Reply