NiMh Charging

[bitternboy]

I have upgraded from two 12v 1200mAh drill batteries run in parallel to two 8.2v 3700mAh run in series in my feather. The chargers that came with the drill batteries are 400mAh and 15v output, me thinks they aren't suitable for my new packs. Can anyone advise another charger.

Edit: I was thinking pretty cheap (me being mean)... this any good?
http://www.sussex-model-centre.co.uk/sh ... p?id=36247

[Team Nuclear]

something like that charger would work but I would highly recommend something like these
http://www.ebay.co.uk/itm/Pro-Peak-2500 ... 43a98288da
http://www.ebay.co.uk/itm/Model-Aeropla ... 4cfa068718
http://www.sussex-model-centre.co.uk/sh ... sp?id=4985

[bitternboy]

Would the first one charge NiMh?

[Team Nuclear]

I think so...
I would recommend the second one I now have 3 of them and they are brilliant and will charge any battery type from 1.2v to 30v

[bitternboy]

I may go for that one eventually then. How much is a new one out of interest?

Edit: Never mind I googled it and got £75

[Team Nuclear]

The most expensive one I bought was £22
Ebay is your best bet for them you can pick them up really cheap and they often appear up type in: pro peak charger

[bitternboy]

cool beans...

[Jonny]

http://www.ebay.co.uk/itm/PRO-PEAK-Cons ... 500wt_1156

[bitternboy]

I'll watch that one aswell...

[Remote-Controlled Dave]

I'd also recommend the pro-peak constellation. I bought one and haven't looked back since. I use it to charge antweights, featherweights, and the heavyweights. It's worth the cost cos you'd never need buy another charger ever again. It does need a power supply however, as it doesn't have a mains plug.