batterys

[Anoptimistprime]

Any ideas it just hobbles around, I've shifted what weight I can to the front and the servo won't go much further
Bit o help peeps?
http://s1088.photobucket.com/albums/i33 ... EO0021.mp4

[earthwormjim]

Semi circular piece of polycarb on the back,so it cant stop there,or a strip of polycarb where the arm bends in the middle,maybe both?Make some mock up parts out of cardboard,and selotape them on,when you find out what works,make a final version out of polycarb.

[joey_picus]

Can you add any spikes or other protrusions to the back of the robot?

[Anoptimistprime]

I have 2.4g left
Ive tried some bit of card as a test but it makes no difference

[josh]

just stick a 12mm m2 bolt out the back of the robot in the centre and it won't be able to balance on the back and cause it to roll right over

[Anoptimistprime]

Sorted now
A simple turning the servo over so the arm starts nearer the back it now flips easily with the help of a small peice on the top

[earthwormjim]

Well done.
Good thinking.

[Anoptimistprime]

I'm now starting on a spinner
I have the chassis sorted and all that its just the weapon
could anyone offer services or recommend somewhere to get some titanium cut or same strength metal for a blade?

it would only be something dead simple eg a round disk with a few teeth on the side
thanks

[Anoptimistprime]

Do I need the red bit on this receiver Ariel?
http://s1088.photobucket.com/albums/i33 ... AG0186.jpg