batterys
Moderators: BeligerAnt, petec, administrator
-
- Posts: 255
- Joined: Sun May 01, 2011 2:30 pm
- Location: Manchester
Re: batterys
Any ideas it just hobbles around, I've shifted what weight I can to the front and the servo won't go much further
Bit o help peeps?
http://s1088.photobucket.com/albums/i33 ... EO0021.mp4
Bit o help peeps?
http://s1088.photobucket.com/albums/i33 ... EO0021.mp4
I'm an optimist prime
Not a negatron
Not a negatron
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: batterys
Semi circular piece of polycarb on the back,so it cant stop there,or a strip of polycarb where the arm bends in the middle,maybe both?Make some mock up parts out of cardboard,and selotape them on,when you find out what works,make a final version out of polycarb.
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
Re: batterys
Can you add any spikes or other protrusions to the back of the robot?
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
-
- Posts: 255
- Joined: Sun May 01, 2011 2:30 pm
- Location: Manchester
Re: batterys
I have 2.4g left
Ive tried some bit of card as a test but it makes no difference
Ive tried some bit of card as a test but it makes no difference
I'm an optimist prime
Not a negatron
Not a negatron
Re: batterys
just stick a 12mm m2 bolt out the back of the robot in the centre and it won't be able to balance on the back and cause it to roll right over
RPD International
www.RPDintl.com
www.RPDintl.com
-
- Posts: 255
- Joined: Sun May 01, 2011 2:30 pm
- Location: Manchester
Re: batterys
Sorted now
A simple turning the servo over so the arm starts nearer the back it now flips easily with the help of a small peice on the top
A simple turning the servo over so the arm starts nearer the back it now flips easily with the help of a small peice on the top
I'm an optimist prime
Not a negatron
Not a negatron
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: batterys
Well done.
Good thinking.
Good thinking.
-
- Posts: 255
- Joined: Sun May 01, 2011 2:30 pm
- Location: Manchester
Re: batterys
I'm now starting on a spinner
I have the chassis sorted and all that its just the weapon
could anyone offer services or recommend somewhere to get some titanium cut or same strength metal for a blade?
it would only be something dead simple eg a round disk with a few teeth on the side
thanks
I have the chassis sorted and all that its just the weapon
could anyone offer services or recommend somewhere to get some titanium cut or same strength metal for a blade?
it would only be something dead simple eg a round disk with a few teeth on the side
thanks
I'm an optimist prime
Not a negatron
Not a negatron
-
- Posts: 255
- Joined: Sun May 01, 2011 2:30 pm
- Location: Manchester
Re: batterys
Do I need the red bit on this receiver Ariel?
http://s1088.photobucket.com/albums/i33 ... AG0186.jpg
http://s1088.photobucket.com/albums/i33 ... AG0186.jpg
I'm an optimist prime
Not a negatron
Not a negatron