how can one servo power 2 claws.
for my second robot im making some claws but i dont know how one servo can power 2 claws
servo
Moderators: BeligerAnt, petec, administrator
would it not be best to keep this in the topic you just created also titled 'servo'?
and you can do it using gears. if you have a gear on the inside of each arm that turn against each other then when you move one arm the other arm will also move. have a look at joey's Arcus i think it was called? I'm pretty sure he posted a picture in your other thread
and you can do it using gears. if you have a gear on the inside of each arm that turn against each other then when you move one arm the other arm will also move. have a look at joey's Arcus i think it was called? I'm pretty sure he posted a picture in your other thread
RPD International
www.RPDintl.com
www.RPDintl.com
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
very good suggestion! have a look at a U brake set up. where the callipers pulled on a straddle cable that can be actuated by the servo and then have a spring release. these a diagram I just found here as to how it works on a bike:
http://t0.gstatic.com/images?q=tbn:ANd9 ... tqwbx3&t=1
http://t0.gstatic.com/images?q=tbn:ANd9 ... tqwbx3&t=1
RPD International
www.RPDintl.com
www.RPDintl.com