problems with sabertooth

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Post by peterwaller »

I suspect it is a problem with the battery voltage. Although they quote them as working from 6 -18v a 5 cell nimh battery will soon drop below 6V. I see in the technobots spec they quote them as usable with 6 to 12 cell nimh not 5 cells. When you quickly change from forward to back you are putting the maximum load on the battery and it is likely that the voltage will dip even more. Also unless the 5v regulator in the BEC is an LDO one(Low Drop Out) it is likley that the 5 v to the receiver is also dipping possible causing problems with that as well. I suggest you try either a 6 cell pack or a 2 cell LiPo.
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

ok i will give that a go does any body know where to buy 6 cell nimhs as i don have enough individual cells to make another one
User avatar
Jonny
Posts: 532
Joined: Mon Aug 30, 2010 8:18 pm
Location: Reigate
Contact:

Post by Jonny »

you can buy the cells off component shop.
Image
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

i have decided to go lipo and will get a 180mah lipo from robot birds would it work with this charger?

http://www.component-shop.co.uk/

edit: its in lipo chargers its the second one from the top
User avatar
Jonny
Posts: 532
Joined: Mon Aug 30, 2010 8:18 pm
Location: Reigate
Contact:

Post by Jonny »

no, if you charge it with that you will get a fire :lol: that charger pumps 800mah into a lipo (fine for 800mah or above). i'd recommend getting a digital charger as that will have an adjustable charge current. like the ones further down the page
Image
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

so your saying lipo+that charger=fire=bad?
kickboxer
Posts: 263
Joined: Mon Jan 24, 2011 10:49 am
Location: wakefield

Post by kickboxer »

your good at adding harry :lol:
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

i have decided to use a pro peak quattro charger where can i find a 12v power suply?
User avatar
Jonny
Posts: 532
Joined: Mon Aug 30, 2010 8:18 pm
Location: Reigate
Contact:

Post by Jonny »

how many amps do you need?
Image
User avatar
Simon Windisch
Posts: 1806
Joined: Tue Apr 15, 2003 12:00 am
Location: Reading
Contact:

Post by Simon Windisch »

You could buy one, ot use an old PC power supply... Andy from Widow Twanky has some to give away.
Post Reply