suitable lipo?

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

Post Reply
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

suitable lipo?

Post by haz »

hey i was just wondering if this lipo would see a spinner through a fight
http://www.giantcod.co.uk/rcmodelpart-3 ... 03788.html
User avatar
BeligerAnt
Posts: 1872
Joined: Wed May 15, 2002 12:00 am
Location: Brighton
Contact:

Post by BeligerAnt »

Antipathy has managed a number of spinner demos at Modelworld over the last 2 days on one Hyperion 240mAh 2S1P battery pack. So 300mAh should definitely see you through a 3-minute fight!

One thing to check is the maximum discharge rate. The Hyperions are rated at 25C (i.e. 25 x 240mA = 6A :o ) Since Antipathy's motor is rated at 4A maximum, the battery will be OK. If you have a higher-rated motor and a battery that is only rated at, say, 10C you may have a problem. Exceeding the maximum discharge rate is a good (bad?) way to kill any type of battery :(
Gary, Team BeligerAnt
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

it is 20c so i think i would be alright for a few seconds at full throttle
Post Reply