Need a motor horn making

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: administrator, BeligerAnt, petec

Post Reply
Andrew_Hibberd
Posts: 1293
Joined: Tue Jan 20, 2004 12:00 am
Location: London
Contact:

Need a motor horn making

Post by Andrew_Hibberd » Sat Nov 21, 2009 1:35 pm

I am working on the strafens' weapon which is going to use a 298:1 hp pololu motor for a 3 bar mech. I have had one 3d printed however the torque of the motor has changed the D slot to a round hole. I am looking for someone to make one from ali with a grub screw.

i would like an arm 4mm thick with 2 holes one 2mm and one 3mm the distance between them being 19.6mm. I also need a grub screw hole for the 3mm hole. If anyone could knock one up i can pay for time/materials/postage. If you need a drawing of what i have already just let me know.

Thanks
TEAM GEEK!

Post Reply