New Robots
Moderators: BeligerAnt, petec, administrator
Heres my new ant
Name: Tesla
Weight: 136g
Length: 15cm
Width: 10cm
Height: 6cm
Drive: 2x 50:1 HP Motors with HDPE wheels with lint roller grip
Speedo/Rx: Peters Planet 5 rx/Speedo
Battery: 2 cell 180mAh LiPo
Weapon: Laser cut Titanium Axe powered by 50:1HP motor
Weapon Contoller: Peters variable axe controller
Armour: Welded 2mm HDPE
Photos are here- http://s881.photobucket.com/albums/ac13 ... G_0377.jpg
Unfortunately no videos at the moment as the axe motor has stripped its gearbox so I need to find a replacement, any suggestions??
Name: Tesla
Weight: 136g
Length: 15cm
Width: 10cm
Height: 6cm
Drive: 2x 50:1 HP Motors with HDPE wheels with lint roller grip
Speedo/Rx: Peters Planet 5 rx/Speedo
Battery: 2 cell 180mAh LiPo
Weapon: Laser cut Titanium Axe powered by 50:1HP motor
Weapon Contoller: Peters variable axe controller
Armour: Welded 2mm HDPE
Photos are here- http://s881.photobucket.com/albums/ac13 ... G_0377.jpg
Unfortunately no videos at the moment as the axe motor has stripped its gearbox so I need to find a replacement, any suggestions??
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
-
- Posts: 331
- Joined: Mon Nov 17, 2008 4:54 pm
- Location: Walsall, West Midlands
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
I have to second Jack's comment, although I do so with more than a hint of dread and hope I won't end up being used to demonstrate the effectiveness of the weapons
Those are very nice though, I continue to be impressed by both of your engineering skills
Those are very nice though, I continue to be impressed by both of your engineering skills
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Before my attempts at FBS were called anticyclone which I started calling the this one.
http://i109.photobucket.com/albums/n66/ ... MG0893.jpg
So I think I will make this one Militant and revert to anticyclone for the FBS.
http://i109.photobucket.com/albums/n66/ ... MG0893.jpg
So I think I will make this one Militant and revert to anticyclone for the FBS.
TruANT is up and running!
Name: TruANT
Weight: ???g (152g so we need to fiddle a bit)
Drive: 2x precision microdrives micro motors
Speedo: Peters option B
Rx: Spektrum AR6110e
Battery: 2 cell LiPo
Weapon: dual aluminium bar spinners (Going to be Laser cut Titanium Discs 8) )
Weapon Drive: 2x Robot Birds Cross mounted brushless outrunners
Weapon Contoller: 2x 10amp brushless speedos
Armour: Aluminium sheet, mesh protecting the guts...
We have only one problem. When i try tto put the spinners up to speed, i can hardly put the stick up very much, and he starts bouncing and shaking! we have found that the spinners are going in the same direction, so that might be it...
Name: TruANT
Weight: ???g (152g so we need to fiddle a bit)
Drive: 2x precision microdrives micro motors
Speedo: Peters option B
Rx: Spektrum AR6110e
Battery: 2 cell LiPo
Weapon: dual aluminium bar spinners (Going to be Laser cut Titanium Discs 8) )
Weapon Drive: 2x Robot Birds Cross mounted brushless outrunners
Weapon Contoller: 2x 10amp brushless speedos
Armour: Aluminium sheet, mesh protecting the guts...
We have only one problem. When i try tto put the spinners up to speed, i can hardly put the stick up very much, and he starts bouncing and shaking! we have found that the spinners are going in the same direction, so that might be it...
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
-
- Posts: 331
- Joined: Mon Nov 17, 2008 4:54 pm
- Location: Walsall, West Midlands
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Hi guys, just returned from RRC. after a meeting with anticyclone, my wheel is in shreds!
I dont mind really, because i suppose it was inevitable. we plan to make some more wheels, and the crazy shaking will stop, as we will get some ti spinners. This (hopefully) also will do a lot more damage! 8)
I'll be bachk! 8) (terminator style!)
I dont mind really, because i suppose it was inevitable. we plan to make some more wheels, and the crazy shaking will stop, as we will get some ti spinners. This (hopefully) also will do a lot more damage! 8)
I'll be bachk! 8) (terminator style!)