NanoTwo Kits

All things antweight

Moderators: petec, administrator, BeligerAnt

Dannyboy94
Posts: 3
Joined: Mon Jun 13, 2016 10:07 am

Re: NanoTwo Kits

Postby Dannyboy94 » Tue Jun 14, 2016 6:34 am

Rapidrory wrote:The kits are only compatible with DSM2, and that TX seems to use the FrSky protocol, so no it wouldn't be compatible. Just as a warning, that controller seems to be sold without an RF module, so you'd need to buy that separately for it to work at all.

Unfortunately, DSM2 is quickly becoming an outdated protocol so it's difficult to pick up new TXs that are still compatible. The Devo 7 (viewtopic.php?f=5&t=2387&p=56251&hilit=devo#p56251) and Blade TXs seem to be some of the few remaining options.

I have looked at updating to DSMX, but haven't yet found a suitable RX.

Ah intresting, kinda all new to me, I bought a spectrum controler years ago second hand so never looked into diffrence
So am I right in thinking this controler that mentions Dsm2 is right?
http://www.hobbyking.com/hobbyking/stor ... de_2_.html

User avatar
Rapidrory
Posts: 1143
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Postby Rapidrory » Tue Jun 14, 2016 10:19 am

Yup, that's the one I use, but be aware that shipping for those is around £40.
Rory Mangles - Team Mangler

Robots: Too Many...

NanoTwo antweight speed controllers. (viewtopic.php?f=1&t=2128)

Dannyboy94
Posts: 3
Joined: Mon Jun 13, 2016 10:07 am

Re: NanoTwo Kits

Postby Dannyboy94 » Tue Jun 14, 2016 12:03 pm

Dam, I have £50 of hobby king points which is why I was trying to get one from there, might just order the one from ebay you linked in that case

User avatar
UserFriendly
Posts: 108
Joined: Wed Feb 18, 2015 3:52 pm

Re: NanoTwo Kits

Postby UserFriendly » Thu Jul 28, 2016 1:10 pm

I've just had a email from Lemon-rx that they will be phasing out DSM2 (I was asking about a 'no-pin' DSMX version of their 5 pack):

Hello Andy,

Thank you for your comment.

We will eventually fade out DSM2 and replaced with DSMX receiver (capable of DSM2 reception).

I will let the team knows about it. Thanks!

Best Regards,

Lemon Rx Officer
Andy B - Team UserFriendly
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.

User avatar
Shakey
Posts: 952
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: NanoTwo Kits

Postby Shakey » Thu Jul 28, 2016 1:26 pm

Hello Alex,

Thank you for your enquiry.

Yes we are actually working on migrating all product to DSMX. For your information, we will have Molex 1.25mm spacing connector DSMX stabilizer plus receiver in about 1 month. Thanks!

Best Regards,

Lemon Rx Officer


I've been bothering them aswell for a No-pins DSMX RX
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots:
AWS 44, 45, 49 & 51 Winner - Far too many robots!

Reala
Posts: 34
Joined: Tue Aug 23, 2016 8:25 am

Re: NanoTwo Kits

Postby Reala » Tue Sep 27, 2016 8:20 pm

Hey Rory =)

I had a good few weeks with the kit, but I think I've done something to it =( I decided to move it from one ant to the other and now, when I connect the battery to the controller (connected to two motors) it makes a clicking noise and the wheel spins round at the rate of about one cog per second and brings with it a clicking noise. Other times one wheel will spin around rapidly for a couple seconds.

I tried re-binding it, but the light only flashes for a second or two before going solid again, if it flashes at all.

Hopefully I've not done something too bad >.>

*anyone reading this - please note this is 100% user error, Rory's kit was working fantastically until I messed it up*

Marc

User avatar
Rapidrory
Posts: 1143
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Postby Rapidrory » Tue Sep 27, 2016 8:26 pm

Hmm, sounds like one of the motor driver chips might have died (happens either when the motor wires short together or the power wires short to the motor wires). Ship it back to me and I'll repair it for you.
Rory Mangles - Team Mangler

Robots: Too Many...

NanoTwo antweight speed controllers. (viewtopic.php?f=1&t=2128)

Reala
Posts: 34
Joined: Tue Aug 23, 2016 8:25 am

Re: NanoTwo Kits

Postby Reala » Tue Sep 27, 2016 9:01 pm

Rapidrory wrote:Hmm, sounds like one of the motor driver chips might have died (happens either when the motor wires short together or the power wires short to the motor wires). Ship it back to me and I'll repair it for you.


Thanks, Rory - you rock. Send me your address =) Will include money to post it back to me as well, as I say, I know it is user error!Truly appreciated.

Reala
Posts: 34
Joined: Tue Aug 23, 2016 8:25 am

Re: NanoTwo Kits

Postby Reala » Sat Oct 08, 2016 5:54 pm

Hey Rory, how is your current wait time on new kits?

User avatar
ozcoder
Posts: 3
Joined: Tue Jul 05, 2016 11:25 am
Contact:

Re: NanoTwo Kits

Postby ozcoder » Sun Oct 09, 2016 2:19 am

Also, any chance of getting 2 sent to Australia?

JMD
Posts: 64
Joined: Mon Jun 01, 2015 9:57 am

Re: NanoTwo Kits

Postby JMD » Mon Jul 24, 2017 10:54 am

(John is diagnosed with ASD and has severe communication problems, please bear this in mind with anything posted.
Those who have met John will understand he means well and his life revolves around robots!)
Any problems etc please pm Limpet (Dad!)


Return to “Antweights”

Who is online

Users browsing this forum: No registered users and 5 guests