NanoTwo Kits

All things antweight

Moderators: petec, administrator, BeligerAnt

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Thu Mar 08, 2018 9:18 pm

Yeah MG90s aren't keen on 7.2v. The V3 was aimed at the high voltage servos which are now becoming common in the sport. You'll either have to get a servo that can handle the voltage, or get a 5v BEC to run the servo.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

sgtbeardy
Posts: 11
Joined: Wed Jan 31, 2018 12:28 pm

Re: NanoTwo Kits

Post by sgtbeardy » Thu Mar 08, 2018 11:27 pm

I guess I'm ordering a 306G-HV then. :D
Team Beardy Bots: Last Minute, Set Myself on Firestorm, Almost Certainly Balanced, Yin and Yang.

Rogg
Posts: 1
Joined: Fri Jun 26, 2015 10:56 am

Re: NanoTwo Kits

Post by Rogg » Mon Mar 12, 2018 7:57 pm

I have an older NanoTwo and it's great, however I much prefer tank style steering. Is there any plans to make these available without mixing?

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Wed Mar 14, 2018 10:02 am

No, however it can be achieved fairly easily using the mixing on the TX to negate the built in mixing.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Zanbots
Posts: 13
Joined: Sat Feb 03, 2018 8:01 pm

Re: NanoTwo Kits

Post by Zanbots » Wed Mar 28, 2018 8:42 pm

What's the best way to get hold of Alex or Rory regarding repairs? My friend has sorted out his brand new V3 when checking it over.
Jeremy Hall
Ants;
24601
Oh, Baby!

User avatar
GeorgeR
Posts: 148
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR » Thu Mar 29, 2018 7:54 pm

Shakey's the contact for all nanotwo tech enquiries now, probably the best bet is to email him, the address is on the Nuts and bots site.
Last edited by GeorgeR on Fri Mar 30, 2018 6:32 am, edited 1 time in total.
Team Zero
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Vampire - horizontal spinner - - Orion - horizontal spinner walker

User avatar
Shakey
Posts: 1036
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: NanoTwo Kits

Post by Shakey » Thu Mar 29, 2018 10:29 pm

GeorgeR wrote:
Thu Mar 29, 2018 7:54 pm
Shakey's the contact for all nanotwo tech enquiries now, probably the best bet is to email him.
Hi,
The contact information can be found in the information of the site.
https://nutsandbots.co.uk/information/

George please could I ask you to remove the email address from your post? Bots crawl this pretty often and it just ends up getting spammed drowning out people I need to talk to.
Last edited by Shakey on Fri Mar 30, 2018 7:56 am, edited 1 time in total.
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!

User avatar
GeorgeR
Posts: 148
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR » Fri Mar 30, 2018 6:35 am

Done, you'll need to edit your post too, it's in the quote.
Hope I haven't caused you too much spam.
Team Zero
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Vampire - horizontal spinner - - Orion - horizontal spinner walker

Smillard
Posts: 14
Joined: Tue Jan 02, 2018 6:11 pm

Re: NanoTwo Kits

Post by Smillard » Mon Apr 02, 2018 10:41 am

Hi Alex and Rory,

Do you think the next batch will be ready before the next event? Im builing a second and need to work out my shopping list!

If they will come available again, it one less thing for me to worry about!

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Tue Apr 03, 2018 7:14 am

Next batch may not be for a while; I'm out of the country for a few weeks.. hopefully I can get at least another batch done before next event though.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Smillard
Posts: 14
Joined: Tue Jan 02, 2018 6:11 pm

Re: NanoTwo Kits

Post by Smillard » Tue Apr 03, 2018 8:21 am

Thanks Rory,

Ill hold out as long as i can as they would be my preferance but will bear in mind i need a back up option!

James Bennett
Posts: 6
Joined: Mon Oct 03, 2016 6:45 pm

Re: NanoTwo Kits

Post by James Bennett » Sun Apr 22, 2018 10:02 pm

I am thinking about running a NanoTwo V3 on 3 or 4S, for purely innocent, non doom spinner related reasons, honest...

Can I just pass 5V into the servo connector from the weapon ESC?
Team Risky Biscuit:
Plan B
Vanguard Mk 2

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Sun Apr 22, 2018 10:05 pm

Should work... though you'll need a decent BEC to power it.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

James Bennett
Posts: 6
Joined: Mon Oct 03, 2016 6:45 pm

Re: NanoTwo Kits

Post by James Bennett » Mon Apr 23, 2018 8:56 pm

Thanks Rory.

Yeah, I already managed to buy some ESCs with only 0.5A BECs :roll: .
Team Risky Biscuit:
Plan B
Vanguard Mk 2

Post Reply