NanoTwo Kits

All things antweight

Moderators: petec, administrator, BeligerAnt

User avatar
GeorgeR
Posts: 160
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR » Fri Feb 02, 2018 6:37 pm

You need to swap the wires on the motor that runs backwards when you push the stick up (if I've pictured this correctly it's the left one).
For future reference it's worth hooking up the motors before soldering to check they are the right way around.
Team Zero
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Vampire - horizontal spinner - - Orion - horizontal spinner walker (coming soon)

Dazmund
Posts: 23
Joined: Wed Dec 27, 2017 10:38 pm
Location: Deptford, London
Contact:

Re: NanoTwo Kits

Post by Dazmund » Mon Feb 05, 2018 3:14 pm

Cheers George. It's all good now. All I got to do now is figure out the best way to mount a weapon servo!

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Fri Feb 16, 2018 9:05 pm

I've finished the first of the production NanoTwo V3s. About 20% smaller than the V2s, they support DSMX as well as DSM2, and include a bind plug and a servo plug for 7.2V servos to be driven directly. Hopefully be on sale in the next week or so.

Image
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

User avatar
GeorgeR
Posts: 160
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: NanoTwo Kits

Post by GeorgeR » Sat Feb 17, 2018 3:19 pm

Wow, the NanoTwo was already the best antweight esc, but to add dsmx functionality and make it smaller as well is remarkable! I'm sure they'll be a great success.
Team Zero
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Vampire - horizontal spinner - - Orion - horizontal spinner walker (coming soon)

Derek Dudge
Posts: 109
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge » Sat Feb 17, 2018 5:50 pm

Awesome. Definitely getting me one, will keep an eye on the site. New build project ahead!
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot

User avatar
FoxFire
Posts: 3
Joined: Mon Dec 04, 2017 5:47 pm
Location: Monifieth, Angus
Contact:

Re: NanoTwo Kits

Post by FoxFire » Mon Feb 19, 2018 4:01 pm

That will be useful, I could use one of those. :)

Mcmad
Posts: 8
Joined: Wed May 17, 2017 6:32 am

Re: NanoTwo Kits

Post by Mcmad » Mon Feb 19, 2018 8:11 pm

Likewise keeping my eye open as struggling to solder neat enough to connect the RX wires onto a dasmikro.

Jeff.

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Tue Feb 27, 2018 8:14 pm

The new NanoTwo V3s are now available on Nuts and Bots: https://nutsandbots.co.uk/product/nanotwov3dualesc/

I've still got parts for another 15 V2s in stock, so I'll be making those when I get time just to use up the parts, and they'll be listed on Alex's store at a reduced price: https://nutsandbots.co.uk/product/nanotwodualesc/
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Derek Dudge
Posts: 109
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge » Tue Feb 27, 2018 9:48 pm

Awesome news.

It's very cool that you got such a key component down to such a low weight. Ohhh, and I'm assuming (hoping!) that the stock amount just wasn't updated for the new ones yet? Or did I miss them already! hehe

Take my money already, damn you :D
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Tue Feb 27, 2018 10:27 pm

You must have missed them I'm afraid; all 12 sold out in 70 minutes! Working on another 10 now..
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Derek Dudge
Posts: 109
Joined: Thu Dec 07, 2017 9:32 pm

Re: NanoTwo Kits

Post by Derek Dudge » Tue Feb 27, 2018 11:30 pm

There's gonna be a lot of new antweights around soon it seems :o

All good! For my purposes I do believe one of the older ones will work just fine, my transmitter is already set for dsm2 anyways. Order placed!
My robots:

Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot

User avatar
Rapidrory
Posts: 1158
Joined: Sun Nov 24, 2013 9:54 pm

Re: NanoTwo Kits

Post by Rapidrory » Mon Mar 05, 2018 8:35 pm

10 more NanoTwo V3s are up for sale: https://nutsandbots.co.uk/product/nanotwov3dualesc/
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Paulmchurd
Posts: 175
Joined: Sun Dec 10, 2017 4:39 pm

Re: NanoTwo Kits

Post by Paulmchurd » Wed Mar 07, 2018 11:04 pm

Any plans to make dual esc with no built in reciever?

For poor people like myself that invested in a transmitter before knowing about your ESC’s. Costly upgrade but it seems inevitable 😫

JMD
Posts: 82
Joined: Mon Jun 01, 2015 9:57 am

Re: NanoTwo Kits

Post by JMD » Thu Mar 08, 2018 1:39 pm

Hello Rory

Will you be getting any more NanoTwo V2/V3 In Stock?.

Thank JMD
(John is diagnosed with ASD and has severe communication problems, please bear this in mind with anything posted.
Those who have met John will understand he means well and his life revolves around robots!)
Any problems etc please pm Limpet (Dad!)

sgtbeardy
Posts: 13
Joined: Wed Jan 31, 2018 12:28 pm

Re: NanoTwo Kits

Post by sgtbeardy » Thu Mar 08, 2018 5:04 pm

Hey Rory, I've just received my NanoTwo v3 today - thanks!! I noticed the servo voltage connector is now 7.2v instead of 5v. Does anybody know what would happen if I plugged a Tower Pro MG90S servo in here? Is the 7.2v too much for it? Cheers.
Team Beardy Bots: Last Minute, Set Myself on Firestorm, Almost Certainly Balanced, Yin and Yang.

Post Reply