TinyTwo Speed Controllers
Moderators: BeligerAnt, petec, administrator
Re: TinyTwo Speed Controllers
Yeah, I've got plenty in stock
Have a read of the datasheet and let me know what options you want: https://docs.google.com/document/d/19oF ... sp=sharing
Have a read of the datasheet and let me know what options you want: https://docs.google.com/document/d/19oF ... sp=sharing
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 109
- Joined: Fri Oct 05, 2012 12:37 am
- Location: Eastleigh, nr Southampton
- Contact:
Re: TinyTwo Speed Controllers
Just took a look, and the N2LVHP seem the best options for me, could I place an order for 2 of these please, my email address is npoate @ hotmail.com if you could send PayPal details I can get that sent to you today! Postage will be to Bristol, bs32 4rt so £52 I believe? Thank you
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
-
- Posts: 109
- Joined: Fri Oct 05, 2012 12:37 am
- Location: Eastleigh, nr Southampton
- Contact:
Re: TinyTwo Speed Controllers
Payment sent and options emailed. Been looking at adding my dealt and rx on them, or my 3 channel rx,.
I know there was mention of issues with the deltang rx with these but it was said it was the rx at fault? Page 7 of this topic
Thanks
Nat
I know there was mention of issues with the deltang rx with these but it was said it was the rx at fault? Page 7 of this topic
Thanks
Nat
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
Re: TinyTwo Speed Controllers
Cheers, I'll get that sorted asap.
And yeah, they work fine with Deltangs as long as the Deltang works
And yeah, they work fine with Deltangs as long as the Deltang works
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: TinyTwo Speed Controllers
Hey,
How tall would a N2LVHP esc be? And would it be possible to have a lemon rx stuck on it?
Thanks.
How tall would a N2LVHP esc be? And would it be possible to have a lemon rx stuck on it?
Thanks.
For my stuff:
http://bodgeitandhope.blogspot.co.uk/
http://bodgeitandhope.blogspot.co.uk/
Re: TinyTwo Speed Controllers
An N2LVHP is about 8-9mm thick.
Yes it would be possible: with a Lemon Rx attached, it'd go up to about 10-11mm thick.
Yes it would be possible: with a Lemon Rx attached, it'd go up to about 10-11mm thick.
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: TinyTwo Speed Controllers
Hmm righto. Expect an order from me when I get paid I think I have 10mm internal height to play with so if it can fit into that that's fantastic.
For my stuff:
http://bodgeitandhope.blogspot.co.uk/
http://bodgeitandhope.blogspot.co.uk/
Re: TinyTwo Speed Controllers
I'm sure it could be squeezed in :L What motors/ how many are you using? A regular N2LV is thinner and will deal with anything apart from 4 HP motors...
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: TinyTwo Speed Controllers
4 30:1 regular non hp unsalted low fat motors. Got them from Will's site.
For my stuff:
http://bodgeitandhope.blogspot.co.uk/
http://bodgeitandhope.blogspot.co.uk/
Re: TinyTwo Speed Controllers
And as long as you're not running on 3 cells
Scott Fyfe-Jamieson, Captain of Epic Robotics. Champion of AWS38/41/42.
http://www.epicrobotics.co.uk
http://www.epicrobotics.co.uk