TinyTwo Speed Controllers

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
mlg678
Posts: 12
Joined: Wed May 17, 2017 11:49 am

Re: TinyTwo Speed Controllers

Post by mlg678 »

Hi thanks for replying,
So this battery?
http://m.ebay.co.uk/itm/RC-Turnigy-nano ... Ciid%253A1

On the servo, think I'll not to look up how to do that! Don't know electrics at all!

Thanks again for replying.

Mike
Mcmad
Posts: 13
Joined: Wed May 17, 2017 6:32 am

Re: TinyTwo Speed Controllers

Post by Mcmad »

In the same boat as you Mike and am also looking to use Rory's system. On the spec sheet linked earlier in the thread there are links to recommended parts, the only one that doesn't work is the battery, I'm looking at using https://hobbyking.com/en_us/turnigy-nan ... b0863.html as its the same power as the one Rory recommended.

Cheers
Jeff.
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: TinyTwo Speed Controllers

Post by Shakey »

Mcmad wrote:In the same boat as you Mike and am also looking to use Rory's system. On the spec sheet linked earlier in the thread there are links to recommended parts, the only one that doesn't work is the battery, I'm looking at using https://hobbyking.com/en_us/turnigy-nan ... b0863.html as its the same power as the one Rory recommended.

Cheers
Jeff.
That's the same battery just with a different connector. You'd have to swap the connector but it'd work.
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
mlg678
Posts: 12
Joined: Wed May 17, 2017 11:49 am

Re: TinyTwo Speed Controllers

Post by mlg678 »

Ah ok, was a bit keen last night and ordered this one, As I saw it in a how to make a ant weight video.

http://m.ebay.co.uk/itm/221951914488?NAV=HOME

Guess it's the wrong one!?

Thanks
Mike
User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Re: TinyTwo Speed Controllers

Post by peterwaller »

mlg678 that one is bordering on the large size but would work fine as long as you can accommodate the size and weight and would mean less charging.
Post Reply