need help

peterwaller · Post by **peterwaller** » Sat May 08, 2010 1:13 pm

Just above haz states it is a 4.8v battery so that should be OK.

Shakey · Post by **Shakey** » Sat May 08, 2010 1:14 pm

peterwaller wrote:Just above haz states it is a 4.8v battery so that should be OK.

Sorry, I missed that bit. i am not sure what happened then, I had an idea but that would have ben if the voltage was too high.

haz · Post by **haz** » Sat May 08, 2010 4:41 pm

just tried the batery and rx on an un moded servo and they work

can't say the same for my sd200s though... as i can't aford new ones ?15 each i will by some SuperTec Park Flyer HPX F/BBs . also how can i make an efective wepon (servo powerd) axe or flipper or somat. thanks

razerdave · Post by **razerdave** » Sat May 08, 2010 6:10 pm

Most flippers have a linkage from the servo to a flipper, however I go for the direct approach and have it attached to the servo horn, however I would recommend using a shorter arm for that, or a metal geared servo.