Team Coolspeedbot's robot builds

All things antweight

Moderators: petec, administrator, BeligerAnt

Post Reply
User avatar
coolspeedbot
Posts: 248
Joined: Sun Jul 26, 2015 4:24 pm
Location: Dover, Kent
Contact:

Re: Team Coolspeedbot's robot builds

Post by coolspeedbot » Fri Mar 23, 2018 8:35 pm

So I finally got round to CADing Bunny-Ears 2.0.

Image

Loaded test STL files to Cura to get a rough weight estimate looking at roughly 58g for all the parts.
Image
James Booth
Team Coolspeedbot

Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).

User avatar
coolspeedbot
Posts: 248
Joined: Sun Jul 26, 2015 4:24 pm
Location: Dover, Kent
Contact:

Re: Team Coolspeedbot's robot builds

Post by coolspeedbot » Wed Mar 28, 2018 12:31 pm

Already making plans for a Killer-Wolf 2.5. A simple improvement on the design making it more compact to make it lighter so I can remove the weight saving holes and improve the shape. about 5mm shorter in height and shorter in length. That has resulted in a weight saving of around 5 grams when it was loaded into Cura.

The other planned change is to upgrade from my stand alone NanoTwo ESC (no built in RX) and the Lemon RX to the new V3 NanoTwo now that it’s DSMX compatible now along with the benefits of making the wiring more streamlined, being smaller and lighter then my current setup.

Image

Image

I know obviously KW 2.0 hasn’t even competed yet but it’s always good to plan ahead. How soon KW 2.0 competes really comes down to if any AWS this year is within my limited travel distance.
James Booth
Team Coolspeedbot

Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).

User avatar
coolspeedbot
Posts: 248
Joined: Sun Jul 26, 2015 4:24 pm
Location: Dover, Kent
Contact:

Re: Team Coolspeedbot's robot builds

Post by coolspeedbot » Sun Dec 09, 2018 11:43 pm

Wow been a while since any updates on the ants thats mostly cause of work and being focused on my Featherweight Coolspeedbot which I took to Extreme Robots Maidstone. But anyway heres whats happing with the Ants.

Killer-Wolf 2.0/2.5:
After getting Fusion 360 I redid the CAD for Killer-Wolf's 2.5 chassis although it could end up being the 2.0 chassis if I decide to change it before the next event (Hopefully there is some I can attend next year).

Image

Bunny-Ears 2.0:
Bunny-Ears 1.5 is still running fine so progress on 2.0 is slow.

Image

New bot, DB Mini:
Oh look another vertical spinner. I decided to give a spinner a bash mainly cause I feel braver with my robot ideas now. The design is very loosely based on one of my creations in Garry's Mod.

Image
James Booth
Team Coolspeedbot

Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).

User avatar
coolspeedbot
Posts: 248
Joined: Sun Jul 26, 2015 4:24 pm
Location: Dover, Kent
Contact:

Re: Team Coolspeedbot's robot builds

Post by coolspeedbot » Tue Mar 12, 2019 4:29 pm

Dusted off Killer-Wolf 2.0 to work on fixing the wiring by replacing the power switch. It was the power switch from KW 1.5 and wear has gotten to it as the connection breaks when the wires are touched. Easier to simply use a new switch with better wires.

Image

I peeled off the plastic strip on the flipper and will replace it with acetate later.

Image

I replaced the badly made 1.5mm thick side panels with new ones, I only had 1mm sheets so I used that.

Image

And with a quick test drive, Killer-Wolf 2.0 is back to being ready to fight.

Image
James Booth
Team Coolspeedbot

Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).

User avatar
coolspeedbot
Posts: 248
Joined: Sun Jul 26, 2015 4:24 pm
Location: Dover, Kent
Contact:

Re: Team Coolspeedbot's robot builds

Post by coolspeedbot » Thu Jul 11, 2019 3:56 pm

Well, it really has been a long time, once again busy with work and Featherweights again but I still want to be active with ants and I've been slowly working on a 3rd ant. Yes, that's right a 3rd ant. This is an idea I've loosely had before and older concepts have been posted on here too.

So the new Ant uses 6WD and is loosely based on my new FW CSB 2, and interestingly this will be my first weaponless Antweight.
Below is an early look at the CAD.
Image

And first actual work is the impulse buy of a NanoTwo from Nuts and Bots, already paired with an RX after a swap around of my RXs in my robots. I just need the motors then finalise the CAD and get the parts printed. Hopefully, I can get time off work to go to the Antweight open.

Image
James Booth
Team Coolspeedbot

Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).

Post Reply