Search found 227 matches
- Sun Jan 07, 2018 5:27 pm
- Forum: Antweights
- Topic: "Flip-it” new build/project
- Replies: 81
- Views: 142493
"Flip-it” new build/project
Hello, Thought I'd share my trials and errors. I was asked by the school I work at to start a electronics/robotics club. My first thought was robot wars. This led me down the rabbit hole of seeing what would be possible with a very limited budget of how I could bring robot wars into the school. I de...
- Fri Jan 05, 2018 10:03 pm
- Forum: Antweights
- Topic: Micro gear motors
- Replies: 8
- Views: 6668
- Fri Jan 05, 2018 8:13 pm
- Forum: Antweights
- Topic: Micro gear motors
- Replies: 8
- Views: 6668
Re: Micro gear motors
Ah I thought it was just 20000/50 which 400rpm. Thought I'd stumbled on a bargain.
- Fri Jan 05, 2018 7:57 pm
- Forum: Antweights
- Topic: Micro gear motors
- Replies: 8
- Views: 6668
Re: Micro gear motors
Thanks again Peter for your knowledge.
I've found this on hobbyking.
https://hobbyking.com/en_us/brushed-mot ... arbox.html
Long wait from China.
Cheers
Paul
I've found this on hobbyking.
https://hobbyking.com/en_us/brushed-mot ... arbox.html
Long wait from China.
Cheers
Paul
- Fri Jan 05, 2018 4:18 pm
- Forum: Antweights
- Topic: Dasmikro
- Replies: 8
- Views: 6396
Re: Dasmikro
Ah thanks Peter. Makes sense. It seems the eBay seller has sent me two differnt gear ratios.
Super annoying.
Cheers
Paul
Super annoying.
Cheers
Paul
- Fri Jan 05, 2018 4:16 pm
- Forum: Antweights
- Topic: Micro gear motors
- Replies: 8
- Views: 6668
Micro gear motors
Hello, As you may have noticed(from my previous posts) I am an absolute novice at robot building. Trial and error of continues servos - dasmikro chip. Built 3 small cardboard robots. The eBay seller of N20 gear motor managed to send me 2 differnt RPM models. My query is can anyone recommend a place ...
- Fri Jan 05, 2018 2:03 pm
- Forum: Antweights
- Topic: Dasmikro
- Replies: 8
- Views: 6396
Re: Dasmikro
next problem...
One motor is spinning faster then the other.
Investigating the gear system. The slower one has more gears. Would this slow the motor down. Is it possible I've been sent the wrong micro motor?
Anyone know what the problem is here?
Cheers
Paul
One motor is spinning faster then the other.
Investigating the gear system. The slower one has more gears. Would this slow the motor down. Is it possible I've been sent the wrong micro motor?
Anyone know what the problem is here?
Cheers
Paul
- Fri Jan 05, 2018 1:53 pm
- Forum: Antweights
- Topic: Dasmikro
- Replies: 8
- Views: 6396
Re: Dasmikro
Fixed!
Removed 1 red wire from RX cables. Resoldered RX wires. Must have previously soldered the parts together.
Cheers
Paul
Removed 1 red wire from RX cables. Resoldered RX wires. Must have previously soldered the parts together.
Cheers
Paul
- Fri Jan 05, 2018 12:21 pm
- Forum: Antweights
- Topic: Dasmikro
- Replies: 8
- Views: 6396
Re: Dasmikro
A servo works using the power from the dasmikro and without using the board.
I'm going to resolder the RX wires. Do I only need to solder 1 red RX wire to the board?
Thanks for the help Peter
Cheers
Paul
I'm going to resolder the RX wires. Do I only need to solder 1 red RX wire to the board?
Thanks for the help Peter
Cheers
Paul
- Fri Jan 05, 2018 10:00 am
- Forum: Antweights
- Topic: Dasmikro
- Replies: 8
- Views: 6396
Re: Dasmikro
Can't get it to work . Any advice?
Thanks
Paul
Thanks
Paul