Search found 433 matches
- Mon Oct 24, 2016 9:10 pm
- Forum: Antweights
- Topic: Occashokka's 3rd attempt at a proper build log
- Replies: 12
- Views: 12481
Re: Occashokka's 3rd attempt at a proper build log
Due to every waking moment being spent on the vertical spinner that is basically from scratch in a rush for bath, the horn or selfrighting has been ignored and I'm going to run on the floorless basis that if I get flipped I'm sorta losing anyway
- Wed Oct 19, 2016 10:07 am
- Forum: Antweights
- Topic: Help!!!
- Replies: 8
- Views: 6766
Re: Help!!!
I cut the red wire and rebound, it still moved on bottom throttle no matter what so I put the trims up, bound then after binding knocked it down and recharged the battery and it all works now so thanks lots
- Tue Oct 18, 2016 9:48 pm
- Forum: Antweights
- Topic: Help!!!
- Replies: 8
- Views: 6766
Re: Help!!!
I hadn't cut any, so only having 5v was hopefully why the motor rated for like 11v+ wasn't working, I will check tomorrow morning
- Tue Oct 18, 2016 8:34 pm
- Forum: Antweights
- Topic: Help!!!
- Replies: 8
- Views: 6766
Re: Help!!!
No beeps :( I have just realized it had a 5v beac on the Afro but the red wire on the servo plug is the middle one and I thought it was a side one you cut, it's the type that goes brown,red, yellow. Blade mounting wise my blade/hunk of aluminium hasn't arrived yet but I intend to attach it between t...
- Tue Oct 18, 2016 7:59 pm
- Forum: Antweights
- Topic: Help!!!
- Replies: 8
- Views: 6766
Help!!!
I've just wired my new spinner up using an afro12A and a red DYS motor, the normal stuff binds fine but the spinner won't work, when I push in the weapons stick the Afro flashes orange then remains green until I release where it goes red then off, the spinner still sitting there not moving, I really...
- Sun Oct 16, 2016 7:23 pm
- Forum: Antweights
- Topic: Part recommendation
- Replies: 55
- Views: 43844
Re: Part recommendation
Mine was more than £5 mine was probably a more complex shape and only 1 tho, The file format I used was .Dxf which I won't pretend to know anything about seen as I didn't design my file.
- Thu Oct 13, 2016 9:18 pm
- Forum: Events
- Topic: Antweight World Series 51 - Peasedown St. John, 29th October 2016
- Replies: 36
- Views: 39973
Re: Antweight World Series 51 - Peasedown St. John, 29th October 2016
Seen as this is quite a close one When I have 3 robots I will sign up
- Sat Sep 24, 2016 3:59 pm
- Forum: Nanoweights
- Topic: slightly more serious thoughts towards a nano
- Replies: 12
- Views: 41103
Re: slightly more serious thoughts towards a nano
Im nearly there for parts now but i made the stupid mistake of getting a 1s lipo i can't charge, so i need a cheap chinese 1s charger that will do the job with minimum expense, so i wanted to check if this works: http://www.ebay.co.uk/itm/3-7v-600mah-25c-Lipo-Battery-4pcs-Charger-for-Syma-X5-X5c-Par...
- Sat Sep 24, 2016 12:01 pm
- Forum: Nanoweights
- Topic: Nanoweight Parts
- Replies: 43
- Views: 102791
Re: Nanoweight Parts
Yay more cool cheap parts from fake amazon... sorry i mean banggood.com which totally isnt chinese amazon lol
- Sun Sep 18, 2016 12:46 pm
- Forum: Questions (and answers)
- Topic: Axe motor/servo?
- Replies: 8
- Views: 9024
Re: Axe motor/servo?
Unfortunately the reason there aren't many is that they are very hard to make effective, most current axes use brushed gearmotors. You say a roughly 10cm hammer arm, Isn't that going to be rather tight in the cube limit?