Search found 45 matches

by Rocketeer13
Wed Oct 16, 2019 11:36 am
Forum: Antweights
Topic: Back Again! Serf's Up Build Concept
Replies: 3
Views: 7767

Re: Back Again! Serf's Up Build Concept

Bit of an update - this is finally moving forward under the name Serf's Up. The main chassis will be 3D printed, my first foray into this method. I'm thinking of using PETG, though I'm still unsure exactly what infill I'll use, so I guess I'll experiment. Here's a link to some images. https://photos...
by Rocketeer13
Thu Feb 28, 2019 1:39 pm
Forum: Antweights
Topic: Back Again! Serf's Up Build Concept
Replies: 3
Views: 7767

Back Again! Serf's Up Build Concept

Hi all! So, with a bit of a rebrand, and some fresh enthusiasm, I'm thinking about heading back into Antweight building. My last attempt (linked below) ended in failure, in large part to the poor quality DasMikro ESC. If there are any newbies on here, thinking they'll be lucky in getting that thing ...
by Rocketeer13
Sun Jun 10, 2018 8:33 pm
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

If you look carefully at the pad that has come off you will see it has a small hole through it. This was a plated through hole that connected to the other side of the board. If you look at the picture below the red arrow shows the track on the other side where the connection goes. This is the 5v ou...
by Rocketeer13
Sun Jun 10, 2018 5:52 pm
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

I had this happen to one of mine, sadly its a case of low price = low quality. While I did get mine working again this convinced me that the dasmikro was nowhere near robust enough for combat, and I chucked the repaired one and gave away my unused one. I would recommend looking at other esc options...
by Rocketeer13
Sun Jun 10, 2018 3:27 pm
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

So I started on my Dasmikro today, and had a few issues. The power didn't seem to be getting through to the rx, despite all of the wires seeming to be in the right place, and not touching one another. Nevertheless I tried to unsolder one wire that looked like it could be touching, and the whole pad ...
by Rocketeer13
Sat Jun 09, 2018 11:21 am
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

Those "resistors" look like capacitors to me. If they are capacitors they probably want to go right across the motor terminals to help suppress any electrical noise generated by the motor brushes. If they actually are resistors, don't connect them across the motors! Yes, those are capacit...
by Rocketeer13
Fri Jun 08, 2018 9:06 am
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

Hello again! Since the last update, I've had most of my components delivered, and the CAD (Cardboard Aided Design) process is well underway. Once I get a bit further, I'll post a few more updates. I wanted to double check the wiring on my Dasmikro. It all looks fine (I think) but I'm a little unsure...
by Rocketeer13
Fri Jun 08, 2018 8:48 am
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

Awesome. My robot 24601. Is a 4 bar lifter. I went 2wd as my bad choice of components didn't size up well. I belive the standard rx from hobbyking is a bit big. The 4CH FS2A from banggood is cheap lightweight and tiny. 24601 has way more space inside now. It works with AFHDS. I believe that's hobby...
by Rocketeer13
Mon Jun 04, 2018 11:45 am
Forum: Antweights
Topic: A Bunch of new Guys & Girls
Replies: 6
Views: 5950

Re: A Bunch of new Guys & Girls

There are certhinly other esc options including cheap ebay ones which will serve to get you started. https://m.ebay.co.uk/itm/10A-Bustophedon-ESC-Brushed-Speed-Controller-For-RC-Car-Truck-Boat-NC/183168394587?hash=item2aa5afe55b:g:OGoAAOSw8fZayd7H This for example. I keep seeing these ESCs come up....
by Rocketeer13
Mon May 14, 2018 9:20 pm
Forum: Antweights
Topic: Ant Attempt 2 - 'Tough Justice'
Replies: 18
Views: 17575

Re: Ant Attempt 2 - 'Tough Justice'

Woof Justice, per chance? Ha. AWS56 is already scheduled for October 13th to give you the exact time to work to. Good luck with it. Thanks Dave! Haha! Correct! I do miss that show. Ah, thanks for that. I aim to be done well before then! I've just ordered my Dasmikro. Hopefully any overheating probl...